My Total Floors®/flip-!t®/powerease® Wet Dry Vac Is Not Spraying | Support

• Trigger must be pressed to spray
• Make sure clean tank is full
• Verify the clean water tank is inserted properly by removing tank and re-inserting it
• Check the valve on the bottom of the clean water tank to make sure water will come through when the x valve is depressed
  • If water does not come out when the x valve is pressed, the tank may be empty, or the valve may be blocked internally
• Check to make sure the handle is installed properly
  • Remove handle and re-attach, making sure handle is pushed down all the way and the screw is inserted straight
    • Improper handle assembly will cause the machine not to spray
• Check for debris on the five spray holes
  • Clean with soft brush (an old tooth brush works great)
  • Check for spray

If still no spray, please visit a BISSELL Authorized Service Center or Contact Us