TORO 08146 2 Inch Receiver Draw Bar
Installation
Preparing the Machine
- Park the machine on a level surface.
- Engage the parking brake or shift the transmission lever to the P (PARK) position.
- Shut off the machine and remove the key.
Installing the Hitch Ball Mount
- Insert the hitch ball mount into the receiver located at the back of the machine (Figure 1).
- Insert the hitch pin through the hole in the receiver and the hitch ball mount. Secure with the hairpin cotter (Figure 1).
- Hairpin cotter
- Receiver
- Hitch ball mount
- Hitch pin
Operation
Towing a Trailer
Refer to the Operator’s Manual for the machine for towing information.
© 2022—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
