Commscope Ssh-1416 Snaptak Adjustable Cable Hanger Instruction Manual

SSH-1416 SnapTak Adjustable Cable Hanger

Product Information

The SnapTak hanger is a cable support system offered by
CommScope Infrastructure Academy. It features two main support
members and six guide pins to center the cable. The hanger is made
of polymer and can be snapped into any other CommScope metal or
polymer SnapTak hanger size. The product comes in different part
numbers, including SSH-47, SSH-710, SSH-1014, and SSH-1416. Each
part number corresponds to a specific cable diameter range.

Product Usage Instructions

1. Ensure that you have received the correct SnapTak hanger for
   your cable diameter by referring to the part number
   specifications.
2. Place the SnapTak hanger onto the cable, making sure that the
   cable is centered in the channel area.
3. Press the hanger firmly onto the cable until it centers in the
   channel.
4. If you need to stack multiple hangers, refer to the acceptable
   stack combinations provided in the user manual.
5. For additional resources on hanger selection and spacing, visit
   commscope.com/SnapStak.
   You can also use the hanger selection calculator and refer to the
   hanger specification and spacing guide available at
   commscope.com/Product-Catalog/Tools-and-Accessories/Product/CoaxialTools,Consumables-and-Accessories.

If you have any questions or need assistance, you can contact
CommScope’s customer service. For North America, call
+1-800-255-1479 (toll-free), and for any other country, call
+1-779-435-6500. You can also reach out via email at
[email protected].

Installation Instructions

SSH-1416 CommScope® SnapTak Adjustable Cable Hanger
Bulletin 7823346 Rev. B | Page 1 of 1

CommScope Infrastructure Academy offers installation training.

1

main support 2

members (2)

4

3

2

1

Millimeters 20 30 40 50 60 70 80 90 100 Inches

latches

The SnapTak hanger has two main support members to engage the cable and six guide pins to help center the cable.

Press hanger onto cable until cable centers in channel.

3

4

5

cable Cable should be centered in channel area and pressed in place.

Push SnapTak hanger in tower member or mounting adapter with ¾” hole. Snap the latches in place.

Polymer SnapTak hangers may be snapped into any other CommScope metal or polymer SnapTak hanger size.

Note:
Visit commscope.com or click QR codes above for hanger selection and hanger spacing resources. Hanger selection calculator: https://www.commscope.com/SnapStak/

Hanger specification and hanger spacing guide: https://www.commscope.com/Product-Catalog/Tools-and-Accessories/Product/CoaxialTools,Consumables-and-Accessories/

Part Number SSH-47 SSH-710
SSH-1014 SSH-1416

Part Information for Available Hangers

Stackability

Cable Diameter Range (mm)

3

4.00 min to 7.00 max

3

7.10 min to 10.00 max

3

10.10 min to 14.00 max

3

14.10 min to 16.00 max

Acceptable stack combinations

CommScope 1100 CommScope Place SE P.O. Box 339, Hickory, NC 28603-0339 (828) 324-2200 (800) 982-1708 www.commscope.com

Customer Service 24 hours North America: +1-800-255-1479 (toll free) Any country: +1-779-435-6500 email: [email protected]

Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices. Aviso: CommScope no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento o retiro. Avis : CommScope décline toute responsabilité pour les conséquences de procédures d’installation, d’inspection, d’entretien ou de retrait incorrectes ou dangereuses. Hinweis: CommScope lehnt jede Haftung oder Verantwortung für Schäden ab, die aufgrund unsachgemäßer Installation, Überprüfung, Wartung oder Demontage auftreten. Atenção: A CommScope abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem segurança de instalação, inspeção, manutenção ou remoção. Avvertenza: CommScope declina eventuali responsabilità derivanti dell’esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure.

© 2018 CommScope Bulletin 7823346 Rev. B

References

• CommScope | now meets next
• CommScope | now meets next
• SnapStak Plus and SnapTak