HOIST-PDT Pendant Light
Product Information:
The HOIST Pendant Light is a stylish and modern lighting fixture
designed to enhance the ambiance of any space. It is manufactured
by Domus Lighting, a reputable company based in Sydney,
Australia.
Product Details:
- Item No.: 22731 (Blk/Clear variant)
- Item No.: 22732 (Sch/Smoke variant)
- Item No.: 22733 (Abr/Amber variant)
- Lamp Base: E27
Specifications:
- Voltage: 240V
- Power: 25W LED Max
- IP Rating: 20
Product Usage Instructions:
Before proceeding with the installation and usage of the HOIST
Pendant Light, please ensure that you have read and understood the
following instructions:
- The installation of the lamp must be carried out by a
professional electrician to ensure safety and proper
functioning. - Prior to fitting the product, make sure that the power supply
is switched off to prevent any electrical accidents. - During operation, avoid touching the lamp as it may be hot and
cause burns. - Keep the pendant light away from hot steam and corrosive gases
to maintain its quality and longevity.
By following these instructions, you can enjoy the functionality
and aesthetics of your new HOIST Pendant Light while ensuring your
safety and maintaining its performance.
If you have any further questions or need assistance, please
contact Domus Lighting at:
Address: 29-31 Richland St. Kingsgrove. Sydney NSW 2208
Australia
Phone: 02 9554 9600
Fax: 02 9554 9433
Email: [email protected]
Website: www.domuslighting.com.au
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com.au
Installation Manual
HOIST-PDT
Date: February 17, 2022 2:55 PM
Variants
Item No.
Lamp Base
Blk/Clear
Sch/Smoke Abr/Amber
22731
22732
22733 HOIST-PDT
E27
Thank you for purchasing your new HOIST Pendant Light, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
Specifications
Voltage: 240V
Power: 25W LED Max
IP Rating: 20
Lamp Base: E27
1
2
3
4
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use -Keep away from hot steam and corrosive gas
