DOMUS Lighting ZELDA-18 Wall Light Installation Guide
Thank you for purchasing your new ZELDA-18 Wall Light, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty
Installation Instructions
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
Specifications
| Voltage | 240V | Lumen (±5%) | Warm White 3000K – 1600lm Neutral White 4000K – 1730lm White 5700K – 1850lm | Dimmable | Yes |
| Power | 18W | Beam Angle | 120º | Operating Temp | -20ºC ~ 45ºC |
| IP Rating | 65 | CCT | 3000K – 4000K – 5700K (Switchable) | Power Factor | 0.9 |
| CRI | ≥90 | Lifespan | 50,000hrs |
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600
Fax: 02 9554 9433
[email protected]
www.domuslighting.com.au
