WASSERSTEIN No-Drill Mount for Google Nest Doorbell

In the Box
- 1 x no-drill mount

- 1 x extra adhesive tape

- 2 x short screws

- 2 x wedge screws

Safety Information
- Read this manual carefully before use. Failure to follow the safety instructions may cause injury or damage to your property.
- Keep away from children as it could be a choking hazard to them.
- To be used with the Google Nest Doorbell (battery) only.
Pre-Installation

- Ensure the designated surface is dry and clean of any debris
Note: For re-installations, make sure there are no traces of adhesive residue left before sticking a new tape. - For optimal binding, the tape needs to be installed at a temperature of at least 60°F (15°C).
Installation
Note: The surface can be damaged when removing the mount from the wall.

- Remove the protective film without touching the adhesive part.
- Carefully position the tape and stick the mount onto a designated surface.

- Apply pressure over the mount to facilitate adhesion. A rigid surface may require additional force.

- Screw the Google Nest Doorbell (battery) backplate into the holes as shown.

If a wedge is needed, attach it to the holes shown instead. Then screw in the doorbell backplate to the wedge.
- Attach the doorbell to the backplate. Note: If solar panel is installed for the doorbell, connect the wires to the doorbell and make sure the wires com out from the opening at both sides.

- To charge the doorbell, remove it from the mount using the key that comes with the doorbell.
Removing the Mount
- Remove the Google Nest Doorbell (battery) and the backplate from the mount.

- Gently wiggle the mount from side to side to prevent any damage to the wall surface.

- Easily remove the tape by pulling it downwards.
- Clean any remaining adhesive residue left from the wall.
Get More Support
Scan the QR code below or email us at: [email protected]
Google Nest Video Doorbell (battery) is not included. Wasserstein is not affiliated with Google LLC. Wasserstein is a trademark of Dropcases Ltd. Google Nest Video Doorbell (battery) is a trademark of Google LLC.
For more information, please visit:
www.wasserstein-home.com
Or contact us at:
[email protected]
Made in China

FAQ & Support
The outdoor heavy-duty tape allows you to mount the mount on most even surfaces, such as a painted wall, pipewood, and glass.































