Maxax Mx19040-10-p Atlanta 10-light Black Candle Style Classic-traditional Chandelier Instruction Manual (+ PDF)

Home » Blog » Maxax Mx19040-10-p Atlanta 10-light Black Candle Style Classic-traditional Chandelier Instruction Manual

Contents hide

1 Maxax MX19040-10-P Atlanta 10-Light Black Candle Style Classic-Traditional Chandelier Instruction Manual

2 WIRE CONNECTION DIAGRAM

3 PARTS INCLUDED

4 Assembly and Installation Steps

5 Documents / Resources

Maxax MX19040-10-P Atlanta 10-Light Black Candle Style Classic-Traditional Chandelier Instruction Manual

MX19040-10-P

Assembly & Installation Instructions

Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to [email protected] or call us at 469-312-6428. We will do everything possible to make you completely satisfied with your purchase.

For video instruction, please search” MX19040-10-P” on Youtube

Product reviews help future customers to make their purchase decision. You are encouraged to share your experience by leaving a short product review on the platform where you bought this product.

Thank you!
Zgear Team

Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.

Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.

Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s)and/or lamp(s).

Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.

( Rated 110-130V/60Hz, bulb 60W maximum.)

( Rated 110-130V/60Hz, bulb 60W maximum.)

WIRE CONNECTION DIAGRAM

Wires meeting safety standards are required to connect the electrical circuit.

CAUTION: Risk of fire

Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.