X251161 Drain Valve
Product Information
- Product Name: Draining Valve Replacement Kit
- Model Number: N/A
- Manufacturer: N/A
- Part Number: 300-0233
- Glue Brand: PVC 747 Weld-ON Glue
- Glue Sizes:
- 118 ml (Part #112-W12725WEL)
- 237 ml (Part #105-0508)
- Cutter Type:
- Utility Knife (Box Cutter) (Part #137-HD-PVC-CUTTER2CE)
- Pipe Cutter (Part #137-HOSECUTTERSCEN)
Product Usage Instructions
- Empty the spa of its water.
- Locate the draining valve by following these steps:
- Open the panel under the keypad.
- Open the Thermofoil and find the drainage hose (identified with
a green sticker). - Pull out the drainage hose from the spa.
- Connect the adapter to the draining valve by applying glue to
both surfaces. Please note:- The adapter has two different diameters. The larger one
connects to the draining valve, and the smaller one connects to the
drainage hose.
- The adapter has two different diameters. The larger one
- Using the cutter, cut the drainage hose near the draining
valve. Ensure that the drainage hose is free of water. - Attach the drain assembly to the drainage hose using glue.
- Allow 24 hours for the glue to dry before filling the spa. The
glue bonds at temperatures of 15 degrees Celsius and above. - Close the Thermofoil tightly with adhesive tape.
If you have any questions, please contact our service department
by phone at 1-866-995-8646, extension 226 or 227.
SERVICE CALL
DRAINING VALVE REPLACEMENT
JUNE 2022
YOU WILL NEED:
1 drain assembly
(Part # 300-0233)
PVC 747 Weld-ON Glue
(118 ml #112-W12725WEL or 237 ml #105-0508)
1 utility knife (box cutter) or pipe cutter
(Part # 137-HD-PVC-CUTTER2CE or 137-HOSECUTTERSCEN)
FIRST STEP
1- Empty the spa of its water. 2- Find the draining valve.
a) Open the panel under the keypad
b) Open the Thermofoil and find the drainage hose (identified with a green sticker)
c) Pull out the drainage hose from the spa
Having any questions? You may contact or service department by phone
1 866 995-8646, ext. 226 or 227
SERVICE CALL
DRAINING VALVE REPLACEMENT
JUNE 2022
SECOND STEP (REPAIR)
1- Connect the adapter to the draining valve by applying glue to both surfaces.
a) NOTE: The adapter has two different diameters. The larger one connects to the draining valve and the smaller one to the drainage hose.
2- With the cutter, cut the drainage
hose near the draining valve.
a) Make sure the drainage hose is free of water
3- Attach the assembly to
the drainage hose with glue
4- Allow 24 hours to dry before filling the spa. The glue bonds at temperatures of 15 degrees and above. 5- Close the Thermofoil tightly with adhesive tape
Having any questions? You may contact or service department by phone
1 866 995-8646, ext. 226 or 227
