NSPH01 NB-IoT Soil pH Sensor
Product Information
Product Name: NB-IoT Soil pH Sensor
Model Number: NSPH01
Overview: The Dragino NSPH01 is a NB-IoT soil
pH sensor designed for IoT of Agriculture. It is used to measure
soil pH and temperature, and send the data to a platform for
analysis of soil acid or alkali levels. The probe is IP68
waterproof, allowing for long-term use when buried in the soil. The
sensor supports various uplink methods such as TCP, MQTT, UDP, and
CoAP to meet different application requirements. It is powered by
an 8500mAh Li-SOCI2 battery, providing long-term use up to 5 years
depending on the use environment, update period, and uplink
method.
NB-IoT Spec:
- B1 @H-FDD: 2100MHz
- B3 @H-FDD: 1800MHz
- B8 @H-FDD: 900MHz
- B5 @H-FDD: 850MHz
- B20 @H-FDD: 800MHz
- B28 @H-FDD: 700MHz
Features:
- Ultra-low power consumption
- pH and temperature alarm function
- 8500mAh battery for long-term use
- Supports pH calibration by end user
- AT commands to change parameters
- NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
- Monitor soil pH with temperature compensation
- Micro SIM card slot
- Uplink on periodically
- Monitor battery level
- Monitor soil temperature
- IP66 waterproof enclosure
- IP68 rating for the sensor probe
- Downlink to change configure
Applications:
- Smart Agriculture
Order Information:
NSPH01
Dragino Technology Co., Limited
Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8
CaiYunRoad LongCheng Street, LongGang District ; Shenzhen 518116,
China
Direct: +86 755 86610829 | Fax: +86 755 86647123
Website: www.dragino.com
Email: [email protected]
Product Usage Instructions
- Check if there is NB-IoT coverage in the installation area and
if it supports the bands (B1/B3/B8/B5/B20/B28 @H-FDD) that NSPH01
operates on. - If the local operator supports NB-IoT, obtain a NB-IoT SIM card
from the local operator. - Install the NSPH01 sensor to establish a NB-IoT network
connection. - Ensure that the sensor probe is securely buried in the soil for
accurate measurements. The probe has an IP68 waterproof rating,
making it suitable for long-term use in various soil
conditions. - Configure the sensor’s uplink method based on your application
requirements. The options include TCP, MQTT, UDP, and CoAP. - If necessary, calibrate the pH measurement by following the
provided instructions for end users. - Monitor the soil pH and temperature readings provided by the
NSPH01 sensor through the chosen uplink method. - Utilize the pH and temperature alarm function to receive alerts
when specific thresholds are exceeded. - Periodically check the battery level to ensure uninterrupted
operation. The sensor is powered by an 8500mAh Li-SOCI2 battery
designed for long-term use. - For advanced configuration, use AT commands to change
parameters according to your specific needs. - The NSPH01 sensor can be used for smart agriculture
applications, providing valuable insights into soil conditions for
optimized farming practices.
NB-IoT Soil pH Sensor
NSPH01
OVERVIEW:
The Dragino NSPH01 is a NB-IoT soil pH sensor for IoT of Agriculture. It is designed to measure the soil pH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
NSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil’s pH with high accuracy and stable value. The NSPH01 probe can be buried into soil for long time use.
NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
NSPH01 supports different uplink methods include TCP,MQTT,UDP and CoAP for different application requirement.
NSPH01 is powered by 8500mAh Li-SOCI2 battery, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
To use NSPH01, user needs to check if there is NB-IoT coverage in the installation area and with the bands NSPH01 supports. If the local operator supports it, user needs to get a NB-IoT SIM card from local operator and install NSPH01 to get NB-IoT network connection.
Specifications:
Common DC Characteristics: Supply Voltage: 2.1v ~ 3.6v Operating Temperature: -40 ~ 85°C
NB-IoT Spec: – B1 @H-FDD: 2100MHz – B3 @H-FDD: 1800MHz – B8 @H-FDD: 900MHz – B5 @H-FDD: 850MHz – B20 @H-FDD: 800MHz – B28 @H-FDD: 700MHz
Features:
Ultra-low power consumption pH and Temperature alarm function 8500mAh Battery for long term use Support pH calibration by end user AT Commands to change parameters NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD Monitor soil pH with temperature compensation
Micro SIM card slot Uplink on periodically Monitor Battery Level Monitor soil temperature IP66 Waterproof Enclosure IP68 rate for the Sensor Probe Downlink to change configure
Applications:
Smart Agriculture
Order InfoNSPH01
Dragino Technology Co., Limited
Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad LongCheng Street, LongGang District ; Shenzhen 518116,China Direct: +86 755 86610829 |Fax: +86 755 86647123
WWW.DRAGINO.COM
[email protected]
Dragino :: Open Source WiFi, Linux Appliance
