Walco 9215 Hallmark Classic Bead Collection 18/10 Stainless Steel 5 9/16 Long 3 Tine Cocktail Fork Owner's Manual

9215 Hallmark Classic Bead Collection 18/10 Stainless Steel 5 9/16 Long 3 Tine Cocktail Fork

Product Information:

This product is stainless flatware, designed to provide a
quality dining experience. It is important to follow the care and
handling instructions to maintain the product’s quality and
longevity.

Care and Handling:

Follow the steps below to ensure proper care and handling of the
stainless flatware:

Handling:

  • Use slotted cylinders in a rack suitable for sink or dishwasher
    use to wash, transport, and dispense the flatware with minimum
    handling.
  • If flatware is washed and stored in the same cylinder, sort the
    flatware into the cylinders with the utensil side down to prevent
    hand contamination after cleaning.
  • If flatware is transferred from the cleaning cylinder to a
    storage cylinder by inversion, sort it in the cleaning cylinder
    with the utensil side up so that it will eventually be stored
    utensil side down.

Washing:

  • After pre-soaking, load the flatware loosely into vertical
    cylinders. Do not wash the flatware flat.
  • Wash the flatware in hot water and a good cleaning agent.
  • Use a nonabrasive or noncorrosive cleaning agent.
  • Check the dishwasher temperature twice daily and ensure it is
    above 130 degrees.

Rinsing:

  • Rinse the clean flatware in water of at least 180 degrees.
  • Add a wetting agent to the rinse to prevent staining from
    minerals in the water.
  • If you have very hard water, it is recommended to use a
    softener.
  • Ensure the flatware in the cylinders is loosely packed to allow
    air drying.
  • Shake the racks to remove any water.
  • To prevent corrosion and film build-up, thoroughly rinse the
    flatware and dry it immediately after rinsing.

Storing:

  • Always store stainless flatware in a dry area.
  • Store the flatware with tines, bowls, and blades down.
  • Make sure the flatware is clean and dry before storing.
  • Ensure you have the proper amount of flatware for rush
    periods.

CARE AND HANDLING
Stainless Flatware
To retain a quality product, please follow the process below
Handling x Slotted cylinders in a rack-suitable for sink or dishwasher use makes it possible to wash, transport, and dispense flatware
with minimum handling. x In a system where flatware is washed and stored in the same cylinder, the flatware should be sorted into the cylinders
utensil side down to prevent hand contamination after cleaning. x In a system where flatware is transferred from cleaning cylinder to a storage cylinder by inversion, it should be sorted in the
cleaning cylinder utensil side up, so that it will eventually be stored utensil side down.
Presoak x Remove all food remnants before presoak but avoid using steel wool or metal scrapers. x Flatware should be pre-soaked immediately following its removal from the table. x Flatware should not remain in presoak for longer than 10 min. x Use presoak compound suggested by manufacturer of your detergent. x Do not use presoak containing silver de-tarnishing agent on stainless. These products cause severe corrosion to flatware. x It is very important that only a plastic or stainless steel pan is used for pre-soaking. NEVER USE AN ALUMINUM PAN. x Make sure liquid or powder compounds are completely dissolved before flatware is placed in presoak. x Change presoak frequently. Chemicals accumulate in the presoak and may cause harm.
Washing x After pre-soaking, immediately load flatware loosely into vertical cylinders. x NEVER WASH FLAT. x Wash your flatware in hot water and a good cleaning agent. x Use a nonabrasive or noncorrosive cleaning agent. x Check dishwasher temperature twice daily, and make sure it is above 130 degrees.
Rinsing x The clean flatware should then be rinsed in water of at least 180 degrees. x A wetting agent may be added to the rinse to prevent minerals in water from staining the flatware. x Should you have very hard water, a softener is recommended. x Make sure flatware in cylinders is loosely packed to allow air drying. x Shake racks to remove any water. x To prevent corrosion and film build-up, flatware MUST be rinsed thoroughly and dried immediately after rinsing.
Storing x Always store stainless flatware in a dry area. x Always store flatware tines, bowls, and blades down. x Flatware must be clean and dry before storing. x Make sure you have the proper amount of flatware for rush periods.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals