The SmartRack Premium 42U Server Rack Enclosure is a heavy-duty,
locking cabinet that can accommodate all standard 19-inch rackmount
equipment. It is designed for secure, high-density server and IT
networking environments. The enclosure is shipped fully assembled
for quick and easy deployment and can be rolled into place on
heavy-duty pre-installed casters (casters are removable). The front
and rear sets of equipment mounting rails can be adjusted in 1/4
increments and the easy-view depth index ensures consistent rail
placement without requiring timeconsuming measurements. The
enclosure also includes toolless accessory mounting rails with
slots for quick installation of compatible PDUs and vertical cable
managers.
Features:
- Ships fully assembled for rapid deployment
- Front and rear sets of equipment mounting rails adjust in 1/4
increments - Toolless accessory mounting rails (2 rails per enclosure)
include slots for quick installation of compatible PDUs and
vertical cable managers - Enclosure includes mounting hardware of 50 pieces of M6 cage
nuts and 50 pieces of M6 screws - Tough textured powder coat finish resists conditions found in
non-IT environments such as warehouses - Massive front-to-rear ventilation capacity with 65+% open space
in door perforation pattern that meets or exceeds server
manufacturer requirements - Maximum usable internal depth of 37 inches/94 cm (front to rear
rail) - Weight ratings of 3000 lbs (1360.8 kgs) stationary and 2250 lbs
(1020.6 kgs) rolling - Front door is locking, reversible and removable
- Rear doors are locking and reversible. Split rear door design
reduces clearance requirements for service entry allowing the
enclosure to be placed closer to a wall - Locking removable side panels are ‘half size’ to make them
smaller and lighter improving ease of Open bottom for cable
access - Top panel has generous cable access holes. Panel can be removed
toollessly in seconds without having to disconnect cables
first - Included stabilizing brackets are used for shipment and can be
reattached at the bottom of the enclosure frame on the inside or
outside of the rack - Meets all enclosure requirements towards PCI DSS (Payment Card
Industry Data Security Standard) Compliance - Compatible with airflow optimization and cable management
accessories
Highlights:
- Standard 24 (600mm) width and 42 (1050mm) depth for optimal use
of floor space - Ships fully assembled
- 3000 lbs (1360.8 kgs) stationary / 2250 lbs (1020.6 kgs)
rolling load capacity - Locking, removable, reversible front and rear doors
- Locking, removable side panels keyed alike with doors
- Pre-installed casters and leveling feet; Rolls through standard
7-ft. (2.13 m) doorway - Meets all enclosure requirements towards PCI DSS (Payment Card
Industry Data Security Standard) Compliance
Package Includes:
- SR42UB Rack Enclosure
- (4) side panels
- (4) side panel locks
- (2) door & side panel keys
- (50) M6 screws
- (50) M6 washers
- (50) M6 cage nuts
- Owner’s Manual
Specifications:
- UPC Code: 037332123770
- Device Compatibility: Patch Panel; Network Switch; UPS; Server
Enclosure - Rack Type: Black
- Width: 27.75 in (70.5 cm)
- Depth: 37 in (94 cm)
- Height: 78.5 in (199.39 cm)
- Rack Size: 42U
- Dimensions (WxDxH): 215.90 x 66.04 x 114.30 cm (85.00 x 26.00 x
45.00 in) - Weight: 152.41 kg (336.00 lbs)
- Color: Black
- Max Load Capacity: 1021 kg (2250 lbs)
Product Usage Instructions:
- Ensure that the SmartRack Premium 42U Server Rack Enclosure is
placed in a secure and high-density server or IT networking
environment. - Roll the enclosure into place on the pre-installed heavy-duty
casters. - Adjust the front and rear sets of equipment mounting rails in
1/4 increments as per your requirement. - Use the toolless accessory mounting rails to install compatible
PDUs and vertical cable managers. - Use the included mounting hardware of 50 pieces of M6 cage nuts
and 50 pieces of M6 screws for installation. - Use the locking, reversible, and removable front and rear doors
to access the equipment. - Use the locking, removable side panels for cable access. They
are ‘half size’ to make them smaller and lighter, improving ease of
use. - Use the included stabilizing brackets for shipment and reattach
them at the bottom of the enclosure frame on the inside or outside
of the rack. - Ensure that the SmartRack Premium 42U Server Rack Enclosure
meets all enclosure requirements towards PCI DSS (Payment Card
Industry Data Security Standard) Compliance. - Use compatible airflow optimization and cable management
accessories for better performance.
SmartRack Premium 42U Server Rack Enclosure, Secure, Standard-Depth
MODEL NUMBER: SR42UB
Heavy-duty, locking, 42U Premium Rack Enclosure Cabinet that accommodates all standard 19-inch rackmount equipment and ships fully assembled for quick and easy deployment in secure, high-density server and IT networking environments.
Features
Ships fully assembled for rapid deployment and rolls into place on heavy-duty pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4″ increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring timeconsuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws Tough textured powder coat finish resists conditions found in non-IT environments such as warehouses Massive front-to-rear ventilation capacity. 65+% open space in door perforation pattern meets or
exceeds server manufacturer requirements Maximum usable internal depth of 37 inches/94 cm (front to rear rail) Weight ratings of 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling Front door is locking, reversible and removable Rear doors are locking and reversible. Split rear door design reduces clearance requirements for
service entry allowing the enclosure to be placed closer to a wall Locking removable side panels are ‘half size’ to make them smaller and lighter improving ease of
installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors. Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24″ to match standard data center floor tiles Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable Compact design allows the enclosure to roll through standard height commercial doorways Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.
1 / 3
Highlights
Standard 24″ (600mm) width and 42″ (1050mm) depth for optimal use of floor space
Ships fully assembled
3000 lbs (1360.8 kgs) stationary / 2250 lbs (1020.6 kgs) rolling load capacity
Locking, removable, reversible front and rear doors
Locking, removable side panels keyed alike with doors
Pre-installed casters and leveling feet; Rolls through standard 7-ft. (2.13 m) doorway
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance
Package Includes
SR42UB Rack Enclosure
(4) side panels
(4) side panel locks
(2) door & side panel keys
(50) M6 screws
(50) M6 washers
(50) M6 cage nuts
Owner’s Manual
Open bottom for cable access Top panel has generous cable access holes. Panel can be removed toollessly in seconds without
having to disconnect cables first Included stabilizing brackets are used for shipment and can be reattached at the bottom of the
enclosure frame on the inside or outside of the rack Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard)
Compliance Compatible with airflow optimization and cable management accessories
Specifications
OVERVIEW UPC Code Device Compatibility Rack Type
PHYSICAL Color Factory Preset Rack Depth (in.) Factory Preset Rack Depth (cm) Factory Preset Rack Depth (mm) Maximum Device Depth (cm) Maximum Device Depth (in.) Maximum Device Depth (mm) Minimum Device Depth (cm) Minimum Device Depth (in.) Minimum Device Depth (mm) Rack Height Shipping Dimensions (hwd / cm) Shipping Dimensions (hwd / in.) Shipping Weight (kg) Shipping Weight (lbs.) Unit Dimensions (hwd / in.) Unit Dimensions (hwd / cm) Unit Weight (lbs.) Unit Weight (kg) Weight Capacity – Rolling (kg) Weight Capacity – Rolling (lbs.)
037332123770 Patch Panel; Network Switch; UPS; Server Enclosure
Black 27.75 70.5 705 93.98 37 940 10.16 4 102 42U 215.90 x 66.04 x 114.30 85.00 x 26.00 x 45.00 152.41 336.00 78.5 x 23.63 x 43 199.39 x 60.02 x 109.22 281 127.46 1,021 2250
2 / 3
Weight Capacity – Stationary (kg) Weight Capacity – Stationary (lbs.) Rack Depth Number of Vertical Mounting Rails
1,361 3000 Standard 4
FEATURES & SPECIFICATIONS Grounding Lug Built-in Cable Management Extra Wide
Front and back door frames Yes No
STANDARDS & COMPLIANCE Product Certifications Product Compliance
UL 60950-1 CE (Europe); EIA/ECA-310-E; RoHS
WARRANTY
Product Warranty Period (Worldwide)
5-year limited warranty
© 2022 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite’s testing agencies: https://www.tripplite.com/products/product-certification-agencies
3 / 3
Product Certification Agencies | Eaton
