ALMAREN Kitchen Mixer Tap WITH Pull Out Spout Stainless Steel
ÄLMAREN
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switch off main shut-off valve before changing mixer tap.
Seal the open surfaces with silicone to prevent water from penetrating the worktop upon any leaks. Silicone is not included.
Before use: Unscrew the Aerator/Flow Guide with
a coin and allow the water to run freely for a few
minutes. Then screw the Aerator/Flow Guide back
in place up to the stop DO NOT OVER TIGHTEN.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Check at regular intervals to make sure that the installation is not leaking.
© Inter IKEA Systems B.V. 2016
2021-03-17
AA-1898728-13
