Dan Dryer 67020 Hand Dryer Installation Guide

DAN DRYER 67020 Hand Dryer Installation Guide

Introduction:

This guide shows how to properply install a DAN DRYER HEPA filter 67020/67021

LOKI

1. Locate the mounting holes on the foot of the dryer. Remove existing filter holder, if any, before the new unit can be installed.
   
2. Place the filter unit on the holes over the air inlet.
   
3. Fit and fully tighten the security screws onboth sides.
   
4. Installation/replacement of the filter is now complete.
   

Read More About This Manual & Download PDF:

References

• Dan Dryer supplies solutions for commercial and public toilets