Enrock EM265C 2-Way Water-Resistant Marine Loudspeaker 
Enrock EM265C 2-Way Water-Resistant Marine Loudspeaker 
INTRODUCTION
Thank you for purchasing this Enrock 6.5” 2-Way Speakers
Please read through these instructions carefully so you will know how to operate your model properly.
Keep these instructions in a safe place for future references.
PACKAGE CONTENTS
- 5” 2-Way Speakers (2)
- Speaker Wire & Mounting Hardware Kit (2)
- User manual / Warranty Card (1)
SAFETY PROVISIONS
- Turning up the volume too high may cause you not to hear what around you. Avoid playing your music at the highest level.
- Use caution in possibly dangerous situations
- Do not operate mobile video equipment while driving a vehicle
- Start your volume control level at a low level and slowly turn up the volume to a comfortable listening level without ear discomfort or distortion.
- Immediately turn the power off and consult an installation expert if you notice strange noises, smoke or odor from this product. Continued use of a faulty unit may cause permanent damage to your system.
INSTALLATION PROVISIONS
- Always consult with a qualified installer
- Use only the installation parts provided with the speaker
- The Speakers have a weather resistant design, it should not be submerged in or under water under any circumstances
- When wiring directly to the vehicles batter, be sure to disconnect the batteries negative terminal wire before starting any wiring procedures, if extending the main power wire, it is suggested that an optional fuse and fuse holder (not included) with minimum rating of 10 Amperes be in-line with the positive battery terminal.
- The ground cable length should not exceed 18-inches
- Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
WIRE DIAGRAM
- Do not touch the speaker flex wire
- Secure all wiring with wire ties
- Properly seal connections to ensure water tight connections
PRIOR TO INSTALLING THIS PRODUCT
- To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. Use this unit with a 12-volt battery and negative grounding only.
- Failure to do so may result in a fire or malfunction.
- When replacing the fuse, be sure to only use a fuse of the rating specified on this product.
- To avoid short-circuiting, cover any disconnected leads with insulating tape. It is especially important to insulate any unused wires, which if left uncovered may cause a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. The black cable is ground, make sure to connect the ground wire first.
- Ensure that the ground cable is properly connected to metal parts of the vehicles body frame or direct to the battery if your vehicle does not have a grounded chassis frame. The ground cable of this units power amp and a second powered system must be connected to the frame separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire or malfunction.
SUGGESTED MOUNTING POSITIONS
The EM265C can be mounted in three different configurations: Always double check for mounting depth limitations,
Never cut before you check,
LIMITED WARRANTY
Enrock warrants this product to be free from defects in material and workmanship for a period of 90 days from purchase. The Enrock product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by accident or which has been misused, disassembled or altered. The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period, return the product with proof of purchase to Enrock. Enrock, at its option, will replace or repair the product free of charge and return the product. In no event shall Enrock be responsible for claims beyond the replacement value of the defective products or in any way be liable or responsible for consequential or incidental damages. No implied warranties, whether for fitness or any particular use or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Enrock. Enrock cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.
FAQs
What is the size of the speakers’ cutouts?
Other six and a half are substituted for the normal six and a half.
What features ought to be present in an Enrock EM265C marine speaker?
You need a speaker system that sounds good at high volume for marine applications. Investing in speakers for ships with higher sensitivity, toughness, and power handling is a good idea.
What are Enrock EM265C coaxial maritime speakers?
A second tweeter is housed inside the woofer of two-way, or coaxial, speakers to handle the high frequencies and faithfully reproduce the audio spectrum of your music. For greater depth and realism, three-way, or triaxial, speakers combine a middle driver with a separate woofer and tweeter.
Are the marine speakers from Enrock EM265C amplified?
Marine stereos frequently have amplification, some of which are quite powerful. Without an external amplifier, good sound can undoubtedly be produced. You can usually test your audio without an amplifier before installing one because you can nearly always do so later.
What distinguishes an Enrock EM265C marine speaker?
Marine speakers are the ones that are most appropriate for use near water. They are typically stronger as well as water-resistant. Marine speakers are constructed to endure the various exposures to moisture, environment, and weather.
Can Enrock EM265C marine speakers get wet?
Marine Rated or Marine Grade items can resist marine environments. Marine-grade components may be exposed to wind, rain, and sunlight (although not necessarily submersion). Because they can withstand high ambient temperatures, they won’t burn if any water is splashed on them.
How durable are the Enrock EM265C marine speakers?
Marine speakers are those made specifically for use on boats. Careful testing ensures that they will withstand the elements.
How are the Enrock EM265C maritime speakers built?
The construction of sea speakers uses robust materials to ensure their durability in the harsher marine environment. They are made of stainless steel and unique plastic materials to survive the elements and sudden temperature changes.
What is an Enrock EM265C two-way maritime speaker?
A second tweeter is housed inside the woofer of two-way, or coaxial, speakers to handle the high frequencies and faithfully reproduce the audio spectrum of your music. For greater depth and realism, three-way, or triaxial, speakers combine a middle driver with a separate woofer and tweeter.
Where do Enrock EM265C maritime speakers go?
For the optimum sound quality, you should always mount your full range speakers as high as you can. Do not mount them near your feet or underneath chairs. You should take into consideration placing speakers over your head on larger vessels and other locations where it is practical. On the other side, subwoofers are the exact opposite.
What uses do Enrock EM265C marine speakers have?
A number of speakers, amplifiers, and other devices make up the marine audio system, which is used to play music on boats.
How bass-friendly are the Enrock EM265C marine speakers?
The maritime speaker generates a powerful full-range sound and offers passable bass performance between 80 Hz and 20 kHz.
How reliable are Enrock EM265C Marine Speakers?
Most marine speakers are quite sturdy and lasting. Ensure that the speakers you purchase are of the highest calibre, durable against rust and corrosion, and well-built. For adequate weather protection, look for speakers with plastic cones, such as those with polypropylene and neoprene rubber surrounds.
How much time should I give my Enrock EM265C boat speaker to fully charge?
It takes about 4 hours to fully charge a battery from empty.
