If you are experiencing streaking, follow the steps below to resolve:
- If the robot is dispensing too much fluid > Go to Dispensing Too Much Solution
- Return machine to dock
- Turn machine off
- Remove Mop Tank > Press down on button and pull out
- Check the correct amount of water and BISSELL formula are being used in the wet tank
- Take off Mop Pads from Mop Pad Drivers
- Machine wash the Mop Pads seperately in warm water
- Only use liquid detergent > Do not use bleach or fabric softener
- Tumble dry on low > Do not iron or dry clean
- Clear any debris from the debris trap
- Put clean pads back onto water tank and put in robot
- Has this resolved the streaking?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
