Anslut 014242 Tower Fan Instruction Manual

Item no. 014242

TOWER FAN

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
JULA AB, BOX 363, SE-532 24 SKARA
2022-04-08
© Jula AB

SAFETY INSTRUCTIONS

•  Only intended to be used indoors.
• This product can be used by children from eight years and upwards and by persons with physical, sensorial, or mental disabilities, or persons who lack experience or knowledge if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved with its use. Do not allow children to play with the product.
• The product must only be used for its intended purpose and in accordance with these instructions.
• Do not cover the product, this can result in overheating or fire.
• Place the product standing upright on a level, stable surface.
• When using the product it must always stand upright it must never be used on its side.
• Pull out the plug from the power point when the product is not in use. Do not pull the power cord to pull out the plug.
• Leave a free space of a least 30 cm around the product to ensure safe and correct functionality.
• Check that the product can oscillate without colliding with or being obstructed by anything in the near vicinity.
• Never poke any objects into the grille in the product. It is especially important to explain this to children to make sure they understand the risks.
• Do not use the product if the power cord or plug is damaged, if the product has tipped over, or if it is not working properly.
• A damaged cord or plug must be replaced by an authorized service center or qualified person to ensure safe use.
• Do not use the product outdoors.
• Do not use the product near a bath, shower, or swimming pool.
• Do not expose the product to direct sun I ig ht.
• Do not use the product together with an external speed controller.
• Do not use the product near flammable liquids or gas.
• Switch off the product and pull out the plug before cleaning.
• Never leave the product unattended when switched on.
• Repairs must only be carried out by an authorized service center.
• If the product stops working properly, switch it off with the switch on the control panel and contact the retailer.

SYMBOLS

	Read the instructions.
	Safety class II.
	Approved in accordance with the relevant directives.
	Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Rated voltage	230 V ~ 50 Hz
Input power	45W
Safety class

ASSEMBLY

1. Remove all the parts of the product from the packaging.
   FIG. 1
2. Fit the two parts of the foot together. Pull the cord through the slot in the foot (A) and put the foot on the fan unit.
   FIG. 2
3. Lock the foot on the fan unit with the plastic nut.

HOW TO USE

1. Plug the plug into a suitable powerpoint.
2. Press the oscillation button OSC (2) to activate oscillation. Press again to deactivate oscillation.
   FIG. 3
3. The timer can be set up to 120 minutes. Turn the timer knob (1) to set the required time. The product switches off after the set time. The longest time that can be set is 120 minutes. Put the timer knob in the ON position for continuous operation.
   FIG. 4
4. Set the required fan speed with the speed buttons (3) on top of the product. There are four modes:
   -OFF: Off
   – 1: Low speed
   -2: Medium speed
   – 3: High speed

MAINTENANCE

NOTE:
Pull out the plug from the power point before installation and/or cleaning.
The product should be cleaned once a month. Clean the fan with a soft cloth moistened with a mild detergent. Make sure that no water or other liquid gets into the fan.
NOTE:
Do not use petrol, solvents or detergents that can damage the plastic parts.