Ansult 004673 Ceiling Fan Instruction Manual

Ansult 004673 Ceiling Fan Instruction Manual

ansult logo004673ansult 004673 Ceiling Fan

READ icon

CEILING LAMP
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com ansult 004673 Ceiling Fan - Fig

SAFETY INSTRUCTIONS

  • Keep out of the reach of children.
  • Do not connect the light to the mains while it is still in the pack.
  • Check that all the electrical and connecting cables comply with local regulations and are connected in accordance with the instructions.
  • Do not overload the mains. This can cause a fire or the risk of electric shock.
  • Do not store the light in a damp or very cold/hot place to avoid damaging the electronics.
  • The electronics in the light are sensitive to knocks and blows. Avoid dropping it.
  • Never attempt to replace damaged electrical cables yourself.
  • Do not use the light without the glass.

WARNING!
New installations and extensions to existing systems must always be carried out by an authorised electrician. If you know how (otherwise contact an electrician), you can replace switches and power points, fit plugs, extension cords, and sockets. Incorrect installation can result in fatal injury and the risk of fire.

Symbols

CE SYMBOLApproved as per applicable directives.
Double insulationClass II. Double insulation.
ansult 004673 Ceiling Fan - Fig1Protection rating IP44.
Dustbin IconRecycle discarded products in accordance with local regulations.
Electric Warning IconWarning: Risk of electric shock.

TECHNICAL DATA

Rated voltage230 V ~ 50 Hz
OutputMax 60 W
Socket Safety class E27
Safety classII
Protection ratingIP44
DimensionsØ 24 x 12 cm

 DESCRIPTION

  1. Plug
  2. Ceiling light fixture
  3. Screw
  4. Light source
  5. Chimney
    FIG. 1

ASSEMBLY

  1. Release the glass from the ceiling light.
  2. Mark out where the ceiling light is to be installed.
  3. Drill holes: Make sure not to damage any recessed cables or conduits.
  4. Connect the wires to the terminal block in the ceiling light.
  5.  Fit the ceiling light with the screws.
  6. Replace the glass on the ceiling light.

2022-07-06
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals