TD10051C 6-Light Chandelier
Product Information: 6-Light Chandelier
The 6-Light Chandelier comes with a fixture body (A), stem (B),
loop (C), fixture chain (D), canopy lock ring (E), canopy (F),
screw (G), and mounting strap (H). It also includes a short bead
string and a long bead string. The product specifications are not
provided in the manual.
Product Usage Instructions
- Pass the wire through Stem (B) and Loop (C), then screw Stem
(B) to Fixture body (A). - Install Long bead string, short bead string and metal chain to
Fixture body (A). (The metal chains are installed above, connecting
the socket and loop, short bead strings connect the two adjacent
socket, long bead strings connect the socket and the middle
position) - Fix Mounting strap (H) to outlet box with Screw (G).
- Link Loop (C) and Canopy (F) by Fixture chain (D).
- Connect the wires according to the picture above. (Please refer
to the wiring instruction for details) - Fix Canopy (F) to Mounting strap (H) with Canopy lock ring
(E). - Install the bulbs(not included).
Wiring Instructions
- Insert the green grounding screw into the hole with two raised
dimples on the mounting bar. Wrap the ground wire from the fixture
(if supplied) around the green grounding screw, then connect it to
ground wire from the outlet box (if not fixed on the outlet box)
using a wire connector(not supplied). If ground wire from the
fixture is not supplied, wrap the ground wire (if not fixed on the
outlet box) from the outlet box around the green grounding screw
and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER
SUPPLY WIRES. - Take note of the color of the wire(s) on your fixture. Identify
which group your fixture wire(s) falls into and connect the wires
according to the directions below:
- [GROUP A]: Connect to Black House Wire
- [GROUP B]: Connect to White House Wire
against the black wire from the outlet box. Do NOT twist wires
together before using wire connectors.
clockwise until you feel firmness.
the connector off, carefully re-do steps 3 and 4 as above, and
check again for a firm connection.
the outlet box in the same manner. Make sure no bare wires can be
seen outside wire connectors.
Cleaning Instructions
To clean the 6-Light Chandelier, wipe the fixture with a soft
cloth. Clean glass with a mild soap. Do not use abrasive materials
such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for
10 minutes before changing the light bulbs.
Contact Information
E-mail: [email protected]
Print in China
Instruction Manual
6-Light Chandelier
Overview
Outlet box Black
Wire nuts Smooth
[GROUP A]
Green(Ground)
Bare copper wire(Ground)
White Ribbed
[GROUP B]H.Mounting strap
G.Screw F.Canopy
E.Canopy lock ring
D.Fixture chain
C.Loop
B.Stem Metal chain
A.Fixture body
Short bead string
Long bead string
Assembly Instruction
1.Pass the wire through Stem (B) and Loop (C), then screw Stem (B) to Fixture body (A).
2.Install Long bead string, short bead string and metal chain to Fixture body (A). (The metal chains are installed above, connecting the socket and loop, short bead strings connect the two adjacent socket, long bead strings connect the socket and the middle position)
3.Fix Mounting strap (H) to outlet box with Screw (G). 4.Link Loop (C) and Canopy (F) by Fixture chain (D). 5.Connect the wires according to the picture above.
(Please refer to the wiring instruction for details ) 6.Fix Canopy (F) to Mounting strap (H) with Canopy lock ring (E). 7.Install the bulbs(not included).
Wiring Instruction
1. Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
2.Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
[GROUP A]: Connect to Black House Wire [GROUP B]: Connect to White House WireBLACK
WHITE
*PARALLEL WIRE (round & smooth) *PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER
BROWN, GOLD OR BLACK WITH TRACER
3.Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors. 4.Fit a wire connector over the wires and screw the connector clockwise until you feel firmness. 5.Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
6.Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
Input voltage 120V Rated power 60W MAX × 6 Lamp socket E12 Cord Length 7ft.
Product Packaging
Fixture body × 1 Metal chain × 6 Loop × 1 & Fixture chain × 1 Mounting strap × 1 Canopy × 1 Long bead string × 6 & Short bead string × 6 Screw × 2 & Wire nut × 3 Lamp instruction × 1
Cleaning
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
CONTACT US
E-mail:[email protected]
Print in china
Digital Services, Technology and Consulting | Reply
