BBT6661A1DARKGREYQUEEN2PCSET Sinclaire Series 2 Piece Bedroom Set
BBT6661 A1 QUEEN BED
This product is a queen-sized bed with wooden furniture parts
and hardware. It requires assembly using the provided hardware and
furniture part list. The bed includes a headboard, footboard, two
side rails, a center rail, center support, center support leg, bed
slats, and bed legs.
Assembly Instructions
- Read the instructions carefully and ensure all parts are
complete before assembling. - Place all wooden furniture parts on a clean and flat soft
surface to prevent scratches. - Follow the figure in the instructions to start assembling.
- Do not fully tighten the nut or bolt until all nuts or bolts
are ready for assembly. - Do not over-tighten the nut or bolt to avoid causing damages to
the thread. - Keep all hardware parts out of reach of children.
Part List
| Item | Description | Qty |
|---|---|---|
| A | Headboard | 1 PC |
| B | Footboard | 1 PC |
| C | Side Rail | 2 PCS |
| D | Center Rail | 1 PC |
| E | Center Support | 2 PCS |
| F | Center Support Leg | 3 PCS |
| G | Bed Slats | 26 PCS |
| H | Bed Leg | 4 PCS |
Hardware List
| Item | Description | Qty |
|---|---|---|
| 1 | JCBC Bolt M6 x 20mm | 8 PCS |
| 2 | M6 Flat Washer | 8 PCS |
| 3 | M6 Spring Washer | 8 PCS |
| 4 | Wood Screw M3.5 x 16mm | 8 PCS |
| 5 | Wood Screw M4 x 25mm | 8 PCS |
| 6 | Bed Slats Side Fitter | 26 PCS |
| 7 | Bed Slats Center Fitter | 13 PCS |
| 8 | Wood Screw M4 x 20mm | 2 PCS |
| 9 | M4 Allen Key (Ball Shape) | 1 PC |
| 10 | M5 Allen Key (Ball Shape) | 1 PC |
Additional Notes
When moving the bed position, the center support legs must be
adjusted to be straight to avoid any breakage problems.
Bench Assembly Instructions
- Read the instructions carefully and ensure all parts are
complete before assembling. - Place all wooden furniture parts on a clean and flat soft
surface to prevent scratches. - Follow the figure in the instructions to start assembling.
- Do not fully tighten the nut or bolt until all nuts or bolts
are ready for assembly. - Do not over-tighten the nut or bolt to avoid causing damages to
the thread. - Keep all hardware parts out of reach of children.
Part List
| Item | Description | Qty |
|---|---|---|
| A | Bench Legs | 1 PC |
| B | Leg Support | 4 PCS |
Hardware List
| Item | Description | Qty |
|---|---|---|
| 1 | JCBC Bolt M6 x 50mm | 4 PCS |
| 2 | JCBB Bolt M8 x 50mm | 8 PCS |
| 3 | M6 Spring Washer | 4 PCS |
| 4 | M8 Flat Washer | 8 PCS |
| 5 | M8 Spring Washer | 8 PCS |
| 6 | Wood Dowel M8 x 30mm | 4 PCS |
| 7 | M4 Allen Key (Ball Shape) | 1 PC |
| 8 | M5 Allen Key (Ball Shape) | 1 PC |
MODEL : BBT6661 A1 QUEEN BED
ASSEMBLY INSTRUCTIONS
Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembly. 2. Do not OVER – TIGHTEN the nut or bolt to avoid causing damages to the thread. 3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY. Tool needed : Screwdriver (not provider).
ITEM A B C D E F G H
PART LIST
DESCRIPTION
HEADBOARD FOOTBOARD SIDE RAIL CENTER RAIL CENTER SUPPORT CENTER SUPPORT LEG BED SLAT BED LEG
QTY
1 PC 1 PC 2 PCS 1 PC 2 PCS 3 PCS 26 PCS 4 PCS
HARDWARE LIST
ITEM
DESCRIPTION
1 JCBC BOLT M6 x 20mm
2 M6 FLAT WASHER
3 M6 SPRING WASHER
4 WOOD SCREW M3.5 x 16mm
5 WOOD SCREW M4 x 25mm
6 BED SLAT SIDE FITTER
7 BED SLAT CENTER FITTER
8 WOOD SCREW M4 x 20mm
9 M4 ALLEN KEY (BALL SHAPE)
10 M5 ALLEN KEY (BALL SHAPE)
STEP 1
D
1 of 2
QTY
8 PCS 8 PCS 8 PCS 8 PCS 8 PCS 26 PCS 13 PCS 2 PCS 1 PC 1 PC
F
STEP 1.2
5
STEP 1.1
2 3
1
H
9
A B
STEP 1.2
5
STEP 1.1
2
3 H
1 9
STEP 2
STEP 2.2
A
Loosen the pre-inserted bolt on the
C
headboard using Allen key ball shape (10).
STEP 2.1
10 A
10
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
STEP 3.1
A
D
A D
8
STEP 3.2
C E
2 of 2
STEP 5
STEP 5.1
Palm
G
7
G
STEP 5.2
6 Palm
6
G
Note: Assemble ( E) vertically as picture shown . 4
STEP 6
G 7 G 6
* When moving the bed position, the center support legs must be adjust to be straight to avoid any broken problem.
ASSEMBLY INSTRUCTIONS
Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER – TIGHTEN the nut or bolt to avoid causing damages to the thread. 3. Keep all hardware parts out of reach of children.
ITEM A B C
PART LIST
DESCRIPTION BENCH LEGS LEG SUPPORT
QTY 1 PC 4 PCS 2 PCS
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY. Tool needed : Rubber Mallet (not provider).
ITEM 1 2 3 4 5 6 7 8
PAGE 1 OF 2
HARDWARE LIST
DESCRIPTION JCBC BOLT M6 x 50mm JCBB BOLT M8 x 50mm M6 SPRING WASHER M8 FLAT WASHER M8 SPRING WASHER WOOD DOWEL M8 x 30mm M4 ALLEN KEY (BALL SHAPE) M5 ALLEN KEY (BALL SHAPE)
QTY
4PCS 8 PCS 4 PCS 8 PCS 8 PCS 4 PCS 1 PC 1 PC
STEP 1
C
x 2
STEP 2
B 6
STEP 1.1
B
x 2
C C
STEP 1.2 x 2
71 3
C
Don’t screw tied
x 8
A
45
28
**Finish step 2, Please screw tied the step 1 bolt.
STEP 3
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
