Baxton Studio Bbt6376 Carlotta 3 Piece Bedroom Set Instruction Manual

BBT6376 Carlotta 3 Piece Bedroom Set

Product Information: BBT6376 Queen Bed

The BBT6376 Queen Bed is a wooden bed that requires assembly. It
comes with a headboard, a footboard, two side rails, a center rail,
three center support legs, 26 bed slats, four bed legs, two center
supports, one headboard support rail, two headboard boxes (left and
right), and two headboard support woods. The bed requires M8 x 30mm
bolts, M6 x 40mm bolts, M8 x 80mm bolts, M6 flat washers, M6 spring
washers, M8 flat washers, M8 spring washers, wood screws M3.5 x
16mm, bed slat side fitters, bed slat center fitters, M4 Allen key
(ball shape), M5 Allen key (ball shape), and wood screws M4 x 20mm
for assembly. The center support legs must be adjusted to be
straight when moving the bed position to avoid any broken
problem.

Hardware and Furniture Part List:

Hardware List:

Cautions:

• Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt
  is ready assembled.
• Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to
  the thread.
• Keep all hardware parts out of reach of children.

Product Usage Instructions:

1. Read the assembly instructions carefully.
2. Ensure that all parts are complete before starting the assembly
   process.
3. Place all wooden furniture parts on a clean and flat soft
   surface to prevent them from being scratched.
4. Follow the figure to start assembling the bed.
5. Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt
   is ready assembled.
6. Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to
   the thread.
7. When moving the bed position, adjust the center support legs to
   be straight to avoid any broken problem.

Product Information: BBT 3106 Night Stand

The BBT 3106 Night Stand is a wooden nightstand that requires
assembly. It comes with a nightstand and two handles. It requires
handle screws and flat washers for assembly.

Hardware and Furniture Part List:

Hardware List:

Cautions:

• Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt
  is ready assembled.
• Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to
  the thread.
• Keep all hardware parts out of reach of children.

Product Usage Instructions:

1. Read the assembly instructions carefully.
2. Ensure that all parts are complete before starting the assembly
   process.
3. Place all wooden furniture parts on a clean and flat soft
   surface to prevent them from being scratched.
4. Follow the figure to start assembling the nightstand.
5. Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt
   is ready assembled.
6. Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to
   the thread.

MODEL : BBT6376 QUEEN BED

ASSEMBLY INSTRUCTIONS

Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER – TIGHTEN the nut or bolt to avoid causing damages to the thread. 3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY. Tool needed : Screwdriver (not provider).

ITEM A B C D E F G H I J K

PART LIST

DESCRIPTION QTY

HEADBOARD

1 PC

FOOTBOARD

1 PC

SIDE RAIL

2 PCS

CENTER RAIL

1 PC

CENTER SUPPORT LEG 3 PCS

BED SLAT

26 PCS

BED LEG

4 PCS

CENTER SUPPORT

2 PCS

HEADBOARD SUPPORT RAIL 1 PC

HEADBOARD BOX (L/ R) 2 PCS

HEADBOARD SUPPORT WOOD 2 PCS

STEP 1
A

STEP 2
K

HARDWARE LIST

ITEM

DESCRIPTION

1 JCBB BOLT M8 x 30mm

2 JCBC BOLT M6 x 40mm

3 JCBB BOLT M8 x 80mm

4 M6 Flat Washer

5 M6 Spring Washer

6 M8 Flat Washer

7 M8 Spring Washer

8 WOOD SCREW M3.5 x 16mm

9 BED SLAT SIDE FITTER

10 BED SLAT CENTER FITTER

11 M4 ALLEN KEY (BALL SHAPE)

12 M5 ALLEN KEY (BALL SHAPE)

13 WOOD SCREW M4 x 20mm

11

J A

6 7

A I

5 2 4

1 of 2
QTY
8 PCS 10 PCS 4 PCS 10 PCS 10 PCS 4 PCS 4 PCS 8 PCS 26 PCS 13 PCS
1 PC 1 PC 2 PCS

3

J

12

STEP 3

D E A

STEP 4

B

A

C C

G

1

12

G

STEP 5
HEADBOARD
D
I x 2

ASSEMBLY INSTRUCTIONS

Note: Make sure the sticker STEP 6

“-> HEADBOARD” faced to

headboard [A]

I

D

HEADBOARD

13
x 2
C

STEP 7

Note: Assemble ( H) vertically as picture shown
9 F 10
Palm

F

10

8 F

H x 4
STEP 8
9

Palm
9

F x 13

F x 26

2 of 2
* When moving the bed position, the center support legs must be adjust to be straight to avoid any broken problem.

MODEL : BBT 3106 NIGHT STAND

ASSEMBLY INSTRUCTIONS

Read this instruction carefully. See hardware and furniture part list for guidance.

PART LIST

PART LIST

Be sure all parts are complete, before you assemble. Place all wooden furniture ITEM DESCRIPTION QTY

ITEM

DESCRIPTION

QTY

parts on a clean and flat soft surface to prevent from being scratched.

A

NIGHT STAND

1 PC

1

–

Follow the figure to start assembling.

B HANDLE

2 PCS

2

–

CAUTIONS : 1. Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER – TIGHTEN the nut or bolt to avoid causing damages to the thread. 3. Keep all hardware parts out of reach of children.

C HANDLE SCREW D FLAT WASHER E DRAWER

2 PCS 2 PCS 2 PCS

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

STEP 1

STEP 2

A

B

C

C

B

STEP 3

E

D

D

E