REF ASK-42703-PVCC
7 Fr.
3 Lumen 16 cm
catheter length
.032 inch dia. spring-wire guide
ASK-42703-PVCC Pressure Injectable Arrowg+Ard Blue Plus Three-Lumen CVC Kit
Pressure Injectable Arrowg+ard BluePlus® Three-Lumen CVC Kit
Contents:
1:Arrowg+ard BluePlus®1Three-Lumen Catheter:7Fr.(2.5mmOD)x16cm,Pressure Injectable
1:Spring-WireGuide,Marked:.032″(0.81mm)dia.x23-5/8″(60cm)(Straight SoftTipon One End-“J”TiponOther)with Arrow Advancer
1:Catheter:18Ga.x2-1/2″(6.35cm)Radiopaqueover20Ga.RW Introducer Needle
1:Pressure Transduction Probe
1:Introducer Needle:Echogenic18Ga.x2-1/2″(6.35cm)XTWand5m LArrow® Raulerson Spring-Wire Introduction Syringe
1:Injection Needle:Safety Glide™225Ga.x1″(2.54cm)and 3m LLuer-Lock Syringe
1:Injection Needle:Safety Glide™222Ga.x1-1/2″(3.81cm)and 5m LLuer-Slip Syringe
1:Syringe:10mLLuer-Lock
1:Tissue Dilator:8.5Fr.(2.8mm)x10.2cm
1:Second Site™AdjustableHub:Fastener
1:Second Site™ Adjustable Hub:Catheter Clamp
1:Sharps Away® Disposal Cup
1:Sharps Away® IILocking Disposal Cup
1:Maximal BarrierDrape™ with4″ fenestration
1:Towel1:Safety Scalpel:#11
1:Checklist/CLIPSheet1:Sterile Procedure Sign
1 : Sterile Procedure Sign
1 : Flow Rate Information Card with Injection Log
2: Gauze Pad: 2″ x 2″ (5 cm x 5 cm)
5: Gauze Pad: 4″ x 4″ (10 cm x 10 cm)
1: Dressing: Tegaderme3 CHG 3-1/2″ x 4-1/2” (8.5 cm x 11.5 cm)
1: Suture: 3-0 Silk with Curved Needle 3: Valve: MaxZeroTM4 Needleless Connector
1: HemoHopper® Fluid Receptacle 1Licensed under US Patent No. 7,329,412. 2A trademark of Becton, Dickinson and Company.
3A registered trademark of 3M Company.
4A trademark of CareFusion or one of its subsidiaries.
Not made with natural rubber latex. Store below 25°C (77°F). Avoid excessive heat above 40°C (104°F). Contraindications: The Arrowg+ard Blue Plus antimicrobial catheter is contraindicated for patients with known hypersensitivity to chlorhexidine, silver sulfadiazine and/or sulfa drugs.
This catheter contains CHLORHEXIDINE and SILVER SULFADIAZINE
 Lumen | Priming Volume* (mL) | Gravity Flow Ratet (mL/hr) | MAX Pressure Injection Flow Rate** (mL/sec) |
| Distal (16 Ga.) Medial (18 Ga.) Proximal (18 Ga.) | 0.38 0.37 0.39 | 2490 1162 1328 | 10 5 5 |
Primina volumes are approximate aid are done without accessories Flow rate values are approximate and are determined using deionized water at 100 cm head height.
** Pressure injection flow rates are determined using media of 11.8 centipoise (cP) viscosity, with 152 cm administration set tubing.
LBL053381 R 00 (2021-05)
