Teleflex Ask-42854-prj Pressure Injectable Arrowg+ard Blue Plus Four-lumen Cvc Kit Instruction Manual

Teleflex Ask-42854-prj Pressure Injectable Arrowg+ard Blue Plus Four-lumen Cvc Kit Instruction Manual

arrow logo

Teleflex ASK-42854-PRJ Pressure Injectable Arrowg+ard Blue Plus Four-Lumen CVC Kit

Teleflex ASK-42854-PRJ Pressure Injectable Arrowg+ard Blue Plus Four-Lumen CVC Kit Instruction Manual

INFORMATION

  • Arrowg+ard Blue Plus®1 Four-Lumen Catheter: 8.5 Fr. (3.0 mm OD) x 16 Cm, FresSsure Injectable
  •  Spring-Wire Guide, Marked: .032″ (0.81 mm) dia. x 17-3/4″ (45 cm) (Straight Soft Tip on One End- “J” Tip on Other) with Arrow Advancer
  • Catheter: 18 Ga. x 2-1/2″ (6.35 cm) Radiopaque over 20 Ga. RW
  • Introducer Needle
  • Pressure Transduction Probe
  • Introducer Needle: Echogenic 18 Ga. x 2-1/2″ (6.35 cm) XTW and 5 mL
  • Arrow Raulerson Spring-Wire Introduction Syringe
  • Injection Needle: Eclipse TM2 22 Ga. x 1-1/2″ (3.81 cm) RW and 5 mL
  • Luer-Slip Syringe
  • Injection Needle: EclipseTM2 25 Ga. x 1″ (2.54 cm) RW and 3 mL Luer-
  • Lock Syringe
  • Syringe: 10 mL Luer-Lock
  • Tissue Dilator: 10 Fr. (3.5 mm) x 10.2 cm
  • Secondsite ” Adjustable Hub: Fastener
  • SecondSite M Adjustable Hub: Catheter Clamp
  • SharpsAway® Disposal Cup
  • SharpsAway® l Locking Disposal Cup
  • Maximal Barrier Drape TM with 4″ fenestration
  • Towel
  • Needle Holder
  • Forceps
  • Safety Scalpel: #11
  • Checklist/CLIP Sheet
  • Sterile Procedure Sign
  • Flow Rate Information Card with Injection Log
  •  Prep Sponge Swab
  • Gauze Pad: 2″ x 2″ (5 cm x 5 cm)
  • Gauze Pad: 4″ x 4″ (10 cm x 10 cm)
  •  Dressing: Tegaderm@3 10 cmx 12 cm
  • Suture: 3-0 Silk with Curved Needle
  • Tray: Prep
  •  HemoHopper® Fluid Receptacle

Not made with natural rubber latex.

Store below 25°C (77°F). Avoid excessive heat above 40°C (104°F). Contraindications: The Arrowg+ard Blue Plus antimicrobial catheter is contraindicated for patients with known hypersensitivity to chlorhexidine, silver sulfadiazine and/or sulfa drugs.

  • Priming volumes are approximate and are done without accessories.
  • Flow rate values are approximate and are determined using deionized water at 100 cm head height.
  • Pressure injection filow rates are determined using media of 11.8 centipoise (CP) viscosity, with 152 cm administration set tubing.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals