Techni Mobili Rta-739dl-snd L Shape Two Tone Desk With Storage Computer Desk Instruction Manual (+ PDF)

Home » Blog » Techni Mobili Rta-739dl-snd L Shape Two Tone Desk With Storage Computer Desk Instruction Manual

Contents hide

1 RTA-739DL-SND L Shape Two Tone Desk with Storage Computer Desk

2 Product Information

3 Product Usage Instructions

3.1 Documents / Resources

3.1.1 References

RTA-739DL-SND L Shape Two Tone Desk with Storage Computer Desk

Product Information

The model RTA-739DL is a furniture product that requires
assembly. It comes with a main parts list that includes various
frame pieces, legs, tubes, panels, and other hardware components.
The product uses cam bolts and locks for assembly, and the package
includes screws, bolts, and fittings required for assembly.

Product Usage Instructions

Before starting the assembly of the RTA-739DL product, please
read the following tips and warnings:

Do a quick inventory to ensure that the package contains all
the parts and hardware listed in the assembly instructions.
To avoid misalignments, always leave the screws loose and
tighten them until all pieces are positioned correctly.
If you find any missing, damaged, or defective parts during
assembly, contact our customer service for assistance.
Read the instructions and analyze the illustrations thoroughly
before proceeding to do the assembly.
Make sure you understand which hardware will be used on each
step.

To assemble the product using cam bolts and locks:

Screw the bolt into the corresponding hole on panel A.
Join panel B to panel A. If panel B comes with the cam lock
pre-installed, make sure it is aligned to receive the bolt’s head
(refer to point 3). There might be a very small gap between the
panels which is normal.
Insert the cam lock on panel B making sure it goes aligned to
receive the bolt’s head.
Turn the cam lock clockwise. This will lock the parts together
and will close any gaps.

Note: The product comes with a main parts list that includes
various frame pieces, legs, tubes, panels, and other hardware
components. The package includes screws, bolts, and fittings
required for assembly. Please refer to the product manual for a
detailed list of hardware, screws, and fittings.

View Fullscreen

MODEL RTA-739DL
ASSEMBLY INSTRUCTIONS
Thank you for purchasing our product.
REV.PRF-6378-0222-0

P.1

RTA-739DL

P.1

· Please read carefully the assembly instructions before the installation.
· Do not discard this manual or any of the packaging material until the unit has been completely assembled.
· Might require two people.

P.2
1 Right frame
x1

RTA-739DL

MAIN PARTS LIST

2 Left frame
x1

3 Center-left leg
x1

P.2
4 Center-right leg
x1

5 Left-top-back tube
x1
7 Left-top-front tube
x1
9 Right-bottom-back tube
x1
11 Corner-bottom-back tube
x1
14 Left tabletop
x1

6 Left-bottom-back tube
x1

8 Right-top-back tube
x1

10 Right-top-front tube
x1

12 Foot
x4

13 Earphones
x1 hook

15 Corner top
x1

16 Right tabletop
x1

17 Right shelf panel
x2

P.3
18 Left panel
x1

RTA-739DL

MAIN PARTS LIST

19 Right panel
x1

20 Back panel
x1

P.3
21 Bottom panel
x1

22 Drawer front panel 23 Drawer left panel 24 Drawer right panel 25 Drawer back panel

26 Drawer bottom
x3 panel

27 Sliders*, each set of 4 pcs
x3
Sets

* Screws D come packaged together with these pieces.

“Flat”: 2 pcs, go inside the cabinet

“L shaped”: 2 pcs, go on the drawers

PART QTY
A 20 B 20 C8 D 40 E4 F7 G 12 H 27

LIST OF HARDWARE, SCREWS AND FITTINGS

ITEM
M5x42 bolts

PART QTY
I 12

ITEM
M5x40

Ø15×12 Cam locks

M4x18

Ø8×40 Dowels
M3.5×14

* These come with the sliders 27

96mm Handle*

M7x50 M6x12 M6x40 M6x30

Corner bracket

1 Screwdriver

Allen Wrench

* This piece is in Silver for desk colors Sand and Walnut
* This piece is in Gold for desk color Gold

P.4

RTA-739DL

P.4

MAIN PARTS LAYOUT (FOR REFERENCE):

P.5

RTA-739DL

P.5

This unit uses cam bolts and locks. The following explains how to use them. This is not an assembly step; it is a guide for when you are actually doing the
assembly using this kind of hardware.

Cam Lock

Cam Bolt

1. Screw the bolt into the corresponding hole on panel “A”.

2. Join panel “B” to panel “A”. If panel “B” comes with the cam lock pre-installed, make sure it is aligned to receive the bolt’s head (refer to point 3). There might be a very small gap between the panels which is normal.

Panel “B”

3. Insert the cam lock on panel “B” making

4. Turn the cam lock clockwise. This will lock the

sure it goes aligned to receive the bolt’s head. parts together and will close any gaps.

Alignment: The cross points towards the panel “A” with the bolt.

Panel “B”

P.6

RTA-739DL

P.6

BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.

Do a quick inventory to make sure the package contains all the parts and hardware listed in the assembly instructions.

To avoid misalignments, always leave the screws loose and tighten them until all pieces are positioned correctly.

Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual.
The replacement parts service is limited to the 48 contiguous United States. If you reside in Alaska, Hawaii, Puerto Rico, U.S. territories or other countries, please contact the supplier from where the unit was purchased.
If during assembly you find an issue or need clarification, please contact our Customer Service for assistance. Please refer to the last pages on this manual.

On each step read the instructions and analyze the illustrations thoroughly before proceeding to do the assembly.

Make sure you

understand

which

hardware will be used on

each step. Using the

wrong size of screw, bolt

or pin might strip the

threads or cause damage

to the part in which it is

being used.

Do not overtighten or force the screws as they might break, strip, damage the threads of the holes or get stuck inside the part.
Sometimes the laminate might cover partially or entirely the hole on a panel. If there is no visible hole for the screw, pass and press the tip of your finger over the area where the hole should be located to feel the indentation, and once found, carefully pierce the laminate to reveal the hole underneath.
If the hole seems too small for the screw, first make sure you are using the correct size of screw and that it’s been installed in the correct hole. If the hole still appears to be too small, carefully pierce the laminate to reveal the hole’s actual size.

P.7
STEP 1

RTA-739DL

P.7

ASSEMBLY STEPS
Grab all the sets of sliders 27 and separate them into 2 groups according to their shape: – The “Flat” ones will be used on the next step. – The “L Shaped” will be used until step 18, set them aside.

27 (x3) 27 (x3)

(Front) (Front)

The “Flat” ones will be used on step 2.

27 (x3) 27 (x3)

(Front) (Front)

The “L-Shaped” will be used on step 18, set them aside.

STEP 2 Hardware:

M3.5×14

12 Pcs

Assemble the “Flat” sliders 27 to the cabinet panels 18 and 19 with screws D, making sure the wheel faces towards the front of the panel. Please note the sliders attach at the front on the 4th hole and the wheel
faces down with 2 empty holes above it.

4th hole from front

2 empty holes

above the wheel

(Front)

P.8

RTA-739DL

P.8

STEP 3 Hardware:

· Insert the dowels C in the indicated holes on panels 18 and 19. · Attach the bolts A into the indicated holes on panels 18 and 19.

· Join panel 18 to 20, insert the cam locks B on panel 20 and turn them

M5x42 Bolt

4 Pcs

to lock the pieces as explained in page 5. Join panel 19 to 20, insert the cam locks B on panel 20 and turn them

to lock the pieces as explained in page 5.

4 Ø15×12 Pcs

Cam lock

4 Ø8×40 Pcs

Dowel

(Front)

STEP 4 Hardware:

· Turn the cabinet over its back side. · Assemble the bottom panel 21 to the panels 18 and 19 with screws E.

M7x50

4 Pcs

(Top)

P.9

RTA-739DL

P.9

STEP 5 Hardware:

Attach the feet 12 to the bottom panel 21 with screws D.

M3.5×14

16 Pcs

STEP 6 Hardware:

Bring the cabinet upright and attach the brackets L to panel 19 facing UP with screws F.

3 M6x12 Pcs

3 Brackets pcs

(Back)

P.10

RTA-739DL

P.10

STEP 7 Hardware:

3 M6x12 Pcs

3 M6x40 Pcs

Do not tighten any screws until the end of step 13.
· Place the tubes 5, 6 and 7 on top of the brackets L in their respective position and assemble them with screws F as shown.
· Assemble the leg 3 to the tubes 5, 6 and 7 with screws G.

Tubes go ON TOP

of the brackets

STEP 8 Hardware:

· Assemble the leg 4 to leg 3 with a screw G. · Assemble the corner bottom tube 11 to legs 3 and 4 with screws G.

3 M6x40 Pcs

P.11

RTA-739DL

P.11

STEP 9 Hardware:

M6x12

1 Pc

· Assemble the shelves 17 to the frames 1 and 2 with screws H from underneath as shown.
· Attach the hook 13 to the frame 1 with screw F from inside.

(Back)

8 M6x30 Pcs

13 F

(Front)

(View from inside)
17

STEP 10

· Pay attention to the orientation of the holes on the tubes.

Hardware:

· Assemble the tubes 8 and 9 to the leg 4 in their respective positions

with screws G.

M6x40

Pcs

· ·

Assemble the tube 10 to tube 7 with screw G. Assemble the frame 2 to the tubes 8, 9 and 10 with screws G.

7 10 2
9

P.12

RTA-739DL

P.12

STEP 11

· With the help of another person, place the corner top 15 and the right

Hardware:

tabletop 16 over the structures.

15 · Using screws H from underneath, secure the corner top 15 to the

M6x30 Pcs

tubes 3, 4, 5, 7 and 8, and secure the right tabletop 16 to the frames 1 and 2 and to the tubes 8 and 10, but LEAVE THEM ALL LOOSE to

allow flexibility to correct any misalignments.

8 1 2

STEP 12 Hardware:

· Attach the bolts A and the dowels C on the indicated holes on the left tabletop 14.

4 M5x42 Pcs

4 Ø8×40 Pcs

Dowel

P.13

RTA-739DL

P.13

STEP 13 Hardware:

· With the help of another person, carefully place the left tabletop 14 over the left cabinet making sure the bolts and dowels enter into the

4 Ø15×12 Pcs

holes of panels 18 and 19. · Insert the cam locks B in panels 18 and 19, and turn them to lock

Cam lock

the tabletop to the side panels.

4 · Secure the tabletop 14 to the tubes 5 and 7 with screws H from M6x30 Pcs underneath, but LEAVE THEM ALL LOOSE to allow flexibility.

· If the panels require alignment, push/pull/lift to get them as aligned as possible with minimal gaps between them.
· Please note that the tops might not end up 100% perfectly aligned, it should not be of concern unless the difference in levels and gaps are considerable that will not allow the desk to function properly.
· When all the tops are installed, proceed to tighten all the screws left loose from step 7 through step 13 inclusive.

5
H 7

P.14

RTA-739DL

P.14

STEP 14

For each of the 3 drawers, assemble the side panels 23 and 24 to the

Hardware:

back panel 25 with screws I. Please note the alignment of the grooves at

M5x40

12 the bottom of the panels.
Pcs

STEP 15
For each of the 3 drawers, slide the bottom panel 26 through the grooves of the side panels and into the back panel as shown.

STEP 16
Hardware:
6
J M4x18 Pcs

O2rU

3 Pcs

For each of the 3 drawers, assemble the handle K to the front surface of the front panel 22 with screws J as shown.
(Gold)
(Silver)
22

Silver handles: For desks

colors Walnut and Sand.

Gold handles: For desk in Gold only.

STEP 17

· For each of the 3 drawers, assemble the front panel 22 to panels 23

Hardware:

and 24 with bolts A and cam locks B as explained in page 5. Please

12 M5x42 Pcs

note that the bottom panel 26 will enter into the groove of panel 22.

12 Ø15×12 Pcs

P.15

RTA-739DL

P.15

STEP 18 Hardware:

M3.5×14

12 Pcs

For each of the 3 drawers, flip them upside-down and assemble the “L” sliders 27 with screws D, making sure the wheel goes towards the back, and that they don’t protrude, otherwise, the drawer raises 1″ and won’t fit in the cabinet.

(Front)

STEP 19

23
24
Insert the drawers into the cabinet, starting with the bottom one, them middle, then top. Insert at an angle with their fronts facing down, making sure the wheels from the drawer slide in the middle of the sliders inside the cabinet.

P.16

RTA-739DL

P.16

ALL DONE!
Give yourself a nice pat on the back. You did a great job!

Handles for desk color GOLD only:

P.17

RTA-739DL
CARE, MAINTENANCE AND SAFETY WARNINGS:

P.17

WEIGHT LIMITS
88 Lbs.
(40 Kg)
11 Lbs.
(5 Kg)
11 Lbs.
(5 Kg)
11 Lbs.
(5 Kg)

88 Lbs.
(40 Kg)

88 Lbs.
(40 Kg)
66 Lbs.
(30 Kg)
66 Lbs.
(30 Kg)

· Do not exceed the indicated weight limits. · Do not expose the surfaces to direct sunlight or to extreme environmental conditions. · Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and
water, then dry with a clean towel. · Do not use solvents or abrasive materials to clean the unit. · If you decide to use a cleaning agent, test first on an area hidden from view such as
underneath the tabletop. · Do not sit on the unit or lean against it. · Do not allow small children to play under or over the unit. · Do not allow small children to reach inside the drawers or compartments without your
supervision. · Do not pull, push or drag the unit to move it for more than 1 feet. The unit must be lifted by
at least 2 persons when moving in the same or adjacent rooms. · Before moving the unit, make sure to secure or remove any object that is heavy or might
fall off. Please note that lifting from the tabletops with too much weight on the product might lead to part damage/separation. · When lifting the unit, use both hands and bend your knees, not your backs. · When transporting the unit to places far away, protect and secure the unit to avoid damage in transit. It is recommended to disassemble in sections if possible. · Shall any part of the unit become defective during the warranty period, replacement parts might be available to you at no charge. Please refer to the last pages on this manual. · The warranty does not extend to regular wear and tear, nor the manufacturer assumes liability for damages or consequences due to accidents, incorrect assembly, negligence, improper use, modifications, or not heeding the above warnings.

P.18

RTA-739DL

P.18

TECHNI MOBILI WARRANTY
DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY TV Stand/Entertainment Center: 2 YEAR WARRANTY

RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. “Defects” as used in this warranty, is defined as any imperfections that impair the use of the furniture or product. RTA Products LLC will replace any defective part, at its discretion, and without charge to the original purchaser other than the freight from the end consumer to RTA Products.
Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty will be effective for the applicable time period beginning the date of purchase on your original sales receipt. RTA product’s obligation under this warranty is limited to repairing or replacing products or parts as provided herein. This product has been designed for and is intended for office and home-office use only. This warranty is Original Purchaser’s sole remedy for product defects, and this warranty does not extend to any product, or damage to any product, caused by or attributed to abuse or misuse, products used for commercial or rental purposes, use modifications of, or attachments to the product, and products or parts not used, maintained, or extended hereunder is in lieu of any and all other warranties, express or implied, including without limitations any implied warranty or merchantability or of fitness for a particular purpose. Please note, all desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the material. Damage of this nature is not covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty is limited to merchandise purchased in the Continental United States. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.
RTA Products will advise you of the procedure to follow in making warranty claims. The following are the procedures for warranty claims:
a. Call us Monday Friday, from 9am-5pm (Eastern Time) at (866) 782-5520 to explain the defect and give your name, address and phone number. Please have ready the model number of our product, date and place of purchase. You can also write to us by e-mail to [email protected] and include the same information.
b. If we determine that replacement will remedy the situation, and in order to determine the extent or the cause of the defect, purchaser will need to send the part in question at purchaser’s expense. Once we receive the part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the replacement. We will ship the replacement at our expense.

FOR SEVERAL HELP OPTIONS
INCLUDING REPLACEMENT PARTS ORDERS
_________________________________________________________________
VISIT: WWW.TECHNIMOBILI.COM
CLICK ON SUPPORT TAB
Scan QR Code to order replacement parts OR EMAIL US: [email protected]