ONE+ VERSE Clamp Speaker
Product Information
The Clamp Speaker is a wireless speaker that can be connected to
other speakers to create a surround sound experience. The
primary/single speaker setup allows for easy connection to other
speakers, and the Connect button on each speaker makes the process
seamless. The Power button on the speaker allows for easy on/off
functionality.
The product complies with FCC radiation exposure limits and
should be installed and operated with a minimum distance of 20 cm
between the radiator and the user’s body. The transmitter should
not be co-located or operating in conjunction with any other
antenna or transmitter.
For additional resources, scan the QR code provided in the user
manual.
Product Usage Instructions
Primary/Single Speaker Set-Up:
- Press the POWER button on the speaker.
- The Power Button Light will indicate the status:
- Blinking – Searching for Device
- Solid – Connected to Device
- Connect Primary to Additional Speakers:
- Press the CONNECT button on the PRIMARY speaker.
- Power on additional speaker(s) and press the CONNECT
button. - The Connect Button Light will indicate the status:
- Red – Primary Speaker
- Green – Secondary Speaker
Note: Ensure that each speaker is placed at least 20 cm away
from the user’s body and that the transmitter is not co-located or
operating in conjunction with any other antenna or transmitter.
CLAMP SPEAKER
QUICK START GUIDE
PRIMARY/SINGLE SPEAKER SET-UP
Step 1: Press POWER button on speaker
Step 2: Turn on BLUETOOTH® device and search for CLAMP SPEAKER in your BLUETOOTH® settings
>>> Power Button Light: Blinking – Searching for Device Solid – Connected to Device
CONNECT PRIMARY TO ADDITIONAL SPEAKERS
Step 3: Press CONNECT button on PRIMARY speaker
Step 4: Power on additional speaker(s) and press the CONNECT button
>>> Connect Button Light: Red – Primary Speaker Green – Secondary Speaker
FOR ADDITIONAL RESOURCES, SCAN QR CODE HERE:
FCC regulatory conformance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC regulatory conformance: This device complies with CAN ICES-003 (B)/NMB-003(B). This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme CAN ICES-003 (B)/NMB-003 (B). Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
RF Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour unenvironnement non contrôé. Cet équipement doit être installé et fonctionner à au moins 20cm de distance d’un radiateur ou de votre corps.
