Vorago 502 Karaoke Speaker User Guide

Vorago 502 Karaoke Speaker

KNOW YOU SPEAKER

1	On / O
2	On/o LEDs
3	Microphone input
4	Charging port
5	Microphone volume
6	Treble adjustment
7	Bass adjustment
8	Volume control
9	SD port
10	3.5 mm ports
11	Dashboard Record play pause previous song next song mode selection Repeat
12	Microphone priority button

REMOTE CONTROL

ON / OFF
Mode
Previous song
Play / Pause / FM
Next song
Repeat
Stop
Volume +
Volume –
Mute
Equalizer
Numbers

IMPORTANT SAFETY PRECAUTIONS

1. Make sure your speaker’s power cord is out of the way of pedestrian traffic. Do not place heavy objects on the power cord as it may damage it, never pull on the cord to remove the plug. Avoid using an extension.
2. The speaker should be placed in a well-ventilated space where there is at least 10 cm of ventilation space on each side. Do not cover the speaker with any object (handkerchief or rag). Do not place it on a bed, sofa, or rug, as this will suffocate the speaker’s ventilation.
3. DO NOT disassemble the case. There are no usable parts inside the unit.
   If the speaker emits any odor or smoke, immediately turn off the power supply

TWS CONNECTION

First bring two KSP-502 speakers side by side, turn on both speakers. Turn o the speakers, long press the
TWS button for 3 seconds. The main speaker will make a sound and the LED display will show “BTST” and the second speaker will automatically connect to the main speaker. The LED display the second horn will mark BT.

Now you can connect via BT from your cell phone, tablet or computer and listen to music from both speakers.

BATTERY AND CHARGING

The speaker takes about 8 hours to fully charge. It will start charging automatically once the power cord is connected.

Low battery level can result in distorted sound; for best acoustic performance, monitor the battery charge level.

To maximize battery life, charge immediately. When the speaker is not used for long periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30 days.

BT CONNECTION

When you turn on your speaker, the LED display will show “OPEN”, which means your speaker is ready to connect BT and you will see the device name “KSP-502” and select it and you are done.

DATA SHEET

Limited product warranty

Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials

Important warranty policy: Please read and complete this warranty policy and seal it in the store when purchasing the product.

Responsibilities

The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or invoice, in which data of the product the date of purchase is specified, to verify the times within the warranty.
Vorago may use new parts, restored or used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and / or accessories that can not be repaired, the change
will be generated by a similar product or with superior characteristics. This warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product.
In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support
Warranty claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico.

Except in situations of force majeure or fortuitous event, the repair time in no
case will be greater than 30 calendar days from the date of receive of the equipment in Vorago.

Exclusions
This warranty is has valid in the following cases:
a) When the product had been used in conditions other than normal.
b) When the product has not been operated in accordance with the instructions for use.
c) When the product has been altered or repaired by unauthorized persons by Vorago

Vorago does not offer any other express warranty for this product.
To make the warranty valid, as well as the acquisition of parts, components, consumables and accessories

To validate a warranty, the following information must be sent to the email: [email protected]

1. Model and color
2. Product failure
3. Ticket or purchase invoice (digitized)
4. Your address with CP, telephone and full Name

Available in the establishment where the product was purchased and / or in our central offices:

Returns
In the case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller

Customer Support

Vorago, S.A. de C.V.
Francisco Villa No. 3
Col. San Agustín, C.P. 45645
Tlajomulco de Zúñiga,
Jalisco, México.
Tel. (33) 3044 6666

Importadora Global Rida S.A. de C.V.
Matilde Márquez No. 68
Colonia Peñón de los Baños C.P. 15520
Alcaldía Venustiano Carranza, CDMX
RFC: IGR1510164C2