MKA-PAPERST Paper Storage Shelf
Product Information
The product is a Simple, Modern, American Made Paper Storage
Shelf manufactured by Quark Enterprises, LLC. It consists of
several parts:
- A – Left Side
- B – Right Side
- C – Handhold (2) Top / Bottom Shelves (identical)
- D – (5) Dividers
Product Usage Instructions
- Insert the Top Shelf (C) into the slots on the Left Side (A),
with the handhold facing inward. Note that the handhold can be
oriented toward the front or back. Note: The handhold must
face inward. - Tighten the shelf (C) slightly to allow it to stand up without
tipping over. - Repeat steps 1 & 2 with the Bottom Shelf (C), ensuring that
the handhold is facing inward. - Set the desired number of Dividers (D) into the slots on the
Left Side (A). Note that the handhold can be oriented toward the
front or back. - Carefully fit the slots on the Right Side (B) over the tabs on
the Shelves (C) and Dividers (D), going from left to right. Loosen
the Top / Bottom shelves (C) for all the slots to line up. - Holding the sides together, carefully pick up the unit and set
it on its front, as shown in the orientation. Press shelves (Cc)
down until flush with the back edge to tighten. - To remove from the slot board, pull up firmly to pop out the
bottom tab.
Note: Adult assembly is required. Assemble the
product completely before use.
If you need further assistance or have any questions, please
contact our customer service agent at +1 (833) 530-0033.
For more information, visit our website: www.sprout-kids.com
© Quark Enterprises 2022. All rights reserved.
PARTS
A
Left Side
B
Right Side
HANDHOLD C
(2) Top / Bottom Shelves
(identical)
D
(5) Dividers
ASSEMBLY INSTRUCTIONS
1 Insert Top Shelf Cc into slots on Left Side Aa , with
the handhold facing inward. Note that the handhold can be oriented toward the front or back.
HANDHOLD MUST FACE INWARD
C
PUT HANDHOLD TOWARD BACK IF DESIRED
A
2 Tighten shelf Cc slightly, just enough to allow the
shelf to stand up without tipping over.
C A
TIGHTEN SLIGHTLY
3 Repeat Steps 1 & 2 with the Bottom Shelf Cc ,
making sure that the handhold is facing inward.
C
C
4 Set the desired number of Dividers dD into slots on
Left Side Aa . Note that the handhold can be oriented toward the front or back.
D
PUT HANDHOLD TOWARD BACK IF DESIRED
Simple. Modern. American Made.
Paper Storage Shelf
Adult assembly only Assemble completely before use
5 Carefully fit slots on Right Side Bb over tabs on Shelves
Cc and Dividers dD , going left to right, as shown. You must loosen the Top / Bottom shelves Cc for all the slots to line up.
CONSTANT PRESSURE
Frustrated?
STOP
Need Help?
Talk to our customer service agent at:
+1 (833) 530-0033
LOOSEN SHELF SO SLOTS LINE UP
CD
B
LOOSEN SHELF SO SLOTS LINE UP
C
7 Position on the
slotboard as desired.
A
6 Holding the sides together, carefully pick up the unit
and set on its front, in the orientation shown. Press shelves Cc down until flush with back edge to tighten.
C
POP IN BOTTOM TAB
To remove from slotboard, pull up firmly to pop out bottom tab.
C
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
MODEL NO. MKA-PAPERST
DOCUMENT: AI-MKA-PAPERST
WWW.SPROUT-KIDS.COM
COPYRIGHT QUARK ENTERPRISES 2022
Modern Kids Table and Chairs | Montessori Furniture for Home by SPROUT – Sprout
