MKA-CABINET Sliding Door Cabinet
Product Information
The Sliding Door Cabinet is a simple and modern storage
solution, proudly made in America by Quark Enterprises. It features
two shelves, two doors, and a sleek handle design. The cabinet is
designed for adult assembly only and should be fully assembled
before use.
Product Usage Instructions
- Begin by assembling the left side of the cabinet (Part A) and
the top shelf (Part C). Insert the top shelf into the slots on the
left side, ensuring that the grooves are facing inward and not next
to the tabs for the slotboard. - Tighten the shelf by pushing it down until the back edge is
flush with the back edge of the left side. - Repeat steps 1 and 2 with the bottom shelf (Part C), making
sure that the grooves are facing inward and line up with the
grooves on the top shelf. - Lay the cabinet on its back and slide in the two doors (Part D)
in the desired orientation. Make sure to have a handle on the left
door and a handle on the right door. - Carefully fit the slots on the right side of the cabinet (Part
B) over the tabs on the shelves (Part C). Ensure that the tab for
the slotboard is on the same corner as the left side. - Holding the sides together, pick up the unit and set it on its
front. Press down on the shelves until they are flush with the back
edge. - Position the cabinet on the slotboard as desired.
To remove the cabinet from the slotboard, pull up firmly to pop
out the bottom tab.
If you have any questions or need assistance, please contact our
customer service agent at +1 (833) 530-0033.
For more information, visit our website at www.sprout-kids.com.
© Quark Enterprises 2022. All rights reserved. Model No.
MKA-CABINET.
PARTS
A
Left Side
B
Right Side
GROOVES C
(2) Top / Bottom Shelves
(identical)
D
(2) Doors HANDLE
ASSEMBLY INSTRUCTIONS
1 Insert Top Shelf Cc into slots on Left Side Aa , with
the grooves facing inward, and not next to the tabs for the slotboard.
GROOVES MUST
FACE INWARD
C
GROOVES NOT NEXT TO TAB FOR SLOTBOARD
A
2 Tighten shelf Cc by pushing down until back edge
of shelf is flush with back edge of Left Side Aa .
C
A
4 Lay cabinet on its back, as shown. Then slide in two
Doors dD in the desired orientation, with a handle on the left & a handle on the right.
HANDLE ON RIGHT
D
D
HANDLE ON LEFT
HOLD SHELVES TOGETHER
Simple. Modern. American Made.
Sliding Door Cabinet
Adult assembly only Assemble completely before use
5 Carefully fit slots on Right Side Bb over tabs on Shelves
Cc . Ensure that the tab for the slotboard is on the same corner as Left Side aA .
B
Frustrated?
STOP
Need Help?
Talk to our customer service agent at:
+1 (833) 530-0033
C C
TABS FOR SLOTBOARD ON THE SAME CORNER
7 Position on the
slotboard as desired.
3 Repeat Steps 1 & 2 with the Bottom Shelf Cc ,
making sure that the grooves are facing inward, and line up with grooves on Top Shelf Cc .
C
GROOVES MUST
FACE INWARD
C
A
A
6 Holding the sides together, carefully pick up the unit
and set on its front, in the orientation shown. Press shelves Cc down until flush with back edge.
C C
B
POP IN BOTTOM TAB
To remove from slotboard, pull up firmly to pop out bottom tab.
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
MODEL NO. MKA-CABINET
DOCUMENT: AI-MKA-CABINET
WWW.SPROUT-KIDS.COM
COPYRIGHT QUARK ENTERPRISES 2022
Modern Kids Table and Chairs | Montessori Furniture for Home by SPROUT – Sprout
