VIMMERN
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switch off the main shut-off valve before changing the mixer tap.
Seal the open surfaces with silicone to prevent water from penetrating the worktop upon any leaks. Silicone is not included.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before use: unscrew the hand spray and allow the water to run freely for 5 minutes. Then screw the hand spray back in place.
Check at regular intervals to make sure that the installation is not leaking.
© Inter IKEA Systems B.V. 2015
2021-03-17
AA-1655360-7
