Generation Lighting 7761603-112 Clybourn 3 Light Semi Flush Mount Ceiling Light Instruction Manual

7761603-112 Clybourn 3 Light Semi Flush Mount Ceiling Light

Product Information: Clybourn Semi-Flush Mount

The Clybourn Semi-Flush Mount is a lighting fixture that is
intended to be installed using NEC compliant junction boxes. This
product is safety listed for damp locations and is suitable for
indoor use. The fixture comes with a mounting plate, canopy,
socket, lamp, and shade.

Manufacturer: Generation Lighting

Model Number: CLYBOURN_FLUSH

Part Number: 7761603 1.0

Address: 7400 Linder Ave., Skokie, IL 60077

Contact Details: T 847.410.4400 | F 847.410.4500 |
www.generationlighting.com

Usage Instructions

1. Secure the mounting plate to the junction box.
2. Connect the fixture to a suitable ground in accordance with
   local electrical codes.
3. Connect the white fixture wire (square and/or rigid) to the
   neutral power line wire with a wire nut.
4. Connect the black fixture wire (round and/or smooth) to the hot
   power line wire with a wire nut.
5. Neatly place all the wires into the junction box, place the
   canopy onto the mounting studs, and secure it in place by screwing
   the cap nuts onto the studs.
6. Install the lamps by inserting them completely into the socket
   holes. Refer to the label on the socket for Max Wattage
   Information.
7. Screw the shade onto the socket threads. Repeat for remaining
   shades.

Note: This product must be installed in
accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the
hazards involved. Please save these instructions for future
reference.

Installation Instructions for
Clybourn Semi-Flush Mount
FLUSHMOUNT

CLYBOURN_FLUSH
7761603 1.0

GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation.

CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!

©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500
www.generationlighting.com

Install the Fixture
1A
JUNCTION BOX 4
MOUNTING PLATE MOUNTING STUD

2 3
CANOPY

CAP NUT 5

SOCKET

LAMP

6

SHADE 7

1 Secure the mounting plate to the junction box.
2 Connect the fixture to a suitable ground in accordance with local electrical codes. 3 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut. 4 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut. 5 Neatly place all the wires into the junction box, place the canopy onto the mounting studs, and secure it in place by screwing the cap nuts onto
the studs. 6 Install the lamps by inserting them completely into the socket holes. Refer to the label on the socket for Max Wattage Information.
7 Screw the shade onto the socket threads. Repeat for remaining shades.

2

References

• Generation Lighting - Our Collections