GP-TOS911SA Camera Grip Stand for Gadget Cover
Product Description:
- Camera grip stand for gadget cover
- Photo button
- Tripod
- Indicator light
- Phone cover adapter
- Push button
Product Specifications:
- Product Name: Camera grip stand for gadget cover
- Model No: GP-TOS911SA
- Battery Capacity: 75 mAh
- Weight: 86g
- Material: PC / silica gel / zinc alloy
- Bluetooth version: 5.0
- Place of Origin: China
Product Usage Instructions:
- Power on the Camera Grip Stand by long pressing the power
button for 3 seconds. - Turn on the phone Bluetooth to enter search mode.
- Search for Camera Grip Stand in the available devices list and
click on it. - The green light of the remote control will turn off after the
connection is established. - To use the tripod, pick out the bottom tripod with your
fingers. - Pull out the tripod and place it on a tabletop.
- Press down the button to take photos using the photo
button.
Camera grip stand for gadget cover
User Manual V20221117. 01
Product Description Photo button
Tripod
Indicator light
Phone cover adapter Push button
Instruction of operation 1. Power on after long pressing the power button for 3 seconds, then turn on the phone bluetooth to enter search condition, and click “Camera Grip Stand” in the searched equipment. Green light of the remote control will be off after connected .
Camera Grip Stand
2. Align the adapter on the back of the cover with the bracket and rotate the adapter 45° to install .
Rotate 45° to install the phone
Contents
Camera grip stand for gadget cover * 1 User Manual * 1
Transverse rotation 160°
3. Pick out the bottom tripod with your fingers . 4. Puling out the tripod and place it on a tabletop .
5. Holding down the push knob and rotating the cover 45°, then remove the product
Press down button
Remove the phone cover by rotating it 45° Replace the battery Remove the remote control, turn the remote control to the back, push out the bottom cover with the card aimed at the pinhole on the bottom of the remote control, and then pull out the bottom cover by hand to replace the button battery .
Product Specifications
Product Name Camera grip stand for gadget cover
Model No
GP-TOS911SA
Battery Capacity 75 mAh
Weight
86g
Material
PC / silica gel / zinc alloy
Bluetooth version 5.0
Place of Origin China
FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authorityto operate the equipment. The device has been evaluated to meet general RF exposure requirement, The device can beused in portable exposure condition without restriction.
