HDLP-8656PC 1-Pendant LED light fixture

Product Information

The product is a ceiling light fixture designed for indoor use
only. It must be installed by a certified electrician according to
the electrical and building codes effective in the region where the
unit is used. Failure to follow the installation and operating
instructions voids the warranty. The product comes with a mounting
bracket, canopy, and wire connectors.

Product Usage Instructions

1. Before beginning installation, turn off the power at the
   circuit breaker and light switch to avoid the risk of electrical
   shock.
2. Attach the mounting bracket to the junction box with the two
   junction box screws. Ensure that the screws attached to the
   mounting bracket point away from the junction box.
3. Connect the white wire (N) from the light fixture to the white
   supply wire (N) from the junction box using a wire connector.
   Connect the black wire (L) from the light fixture to the black
   supply wire (L) from the junction box using a wire connector.
   Connect the ground wire (G) from the light fixture to the ground
   supply wire (G) from the junction box using a wire connector.
4. Put the wires into the canopy.
5. Mount the canopy onto the mounting bracket and secure it with
   the canopy screw.
6. Measure the distance from the ceiling to the bottom of where
   you would like your light fixture to hang. To retract the wire,
   gently push it into the light fixture base. To extend the wire,
   push the metal collar while gently pulling the wire down. Once the
   wire is at the desired length, turn the fixture over and slide the
   plastic wire retainer up to the wire nut to prevent the pendant
   from slipping down when in use.

Note that any major adjustments to the height of the light
fixture should be made before installation. Furthermore, it is
recommended that the product be installed by a certified
electrician to ensure proper installation and to adhere to local
building codes.

1IN-PeSndTaRntULECD lTigIhOt fiNxturMe ANUAL
IMPORTANT, KEEP FOR FUTURE REFERENCE: PLEASE READ CAREFULLY.

The installer and/or user held responsible for any some states or provinces,

must read, understand problems or product it is a legal requirement

and follow these

malfunction.

for this type of product to

instructions before

Failure to follow

be installed by a certified

installing the product. installation and/or

electrician, according to

This product must be operating instructions the electrical and building

properly installed before voids the warranty.

codes effective in the

it is used. If instructions We recommend that this region where the unit is

are not followed, the product be installed by a used.

manufacturer will not be certified electrician. In

WARNING: Risk of electrical shock. Turn off breaker at the panel.

Switch off the main

electrical supply from

the fuse box/circuit

Do not use outdoor.

breaker before installing Residential use only.

the unit or doing any Indoor use only

maintenance.

HEIGHT

ADJUSTMENT 1. With the power off,

NOTE: It is recommended measure the distance

to make any major

from the ceiling to the

adjustments to the height bottom of where you

of the light fixture before would like your light

installation.

fixture to hang. 2. To retract the wire, gently push it into the light fixture base (fig. 1).

1

the metal collar is

fixture over and slide the

3. To extend the wire, push the metal collar while gently pulling the wire down (fig. 2). When

released, the wire will be plastic wire retainer up to

fixed into position.

the wire nut, to prevent

4. Once the wire is at the the pendant from slipping

desired length, turn the down when in use.

fig. 1

fig. 2

Plastic wire retainer

Metal collar

WARNING: Risk of electrical shock. Turn off breaker atthe panel.

STEP-BY-STEP INSTALLATION
1. Turn off power at the circuit breaker and the light switch.Ensure the power is off before continuing. 2. Attach the mounting bracket to the junction box with the two

junction box screws. Ensure the screws attached to the mounting bracket point away from the junction box (fig. 3). 3. Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector.

Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig.
2

4). 4.Put the wires into the canopy.
fig. 3

5.Mount the canopy onto the mounting bracket and secure it

with the canopy screw.
Junction box Mounting bracket

Junction box screw

fig. 4 Ground wire (G)
Canopy

Mounting bracket Wire connector White(N) Black (L)
Canopy screw

3