1200 Ergoplan Workstation Desk
Ergoplan Desk 1200 Product Information
The Ergoplan Desk 1200 is a desk that comes with a top panel,
left and right side panels, and a modesty panel. It requires
assembly and comes with 6×35 cam bolts, 8×30 dowel pins, cam
stickers, brackets, and screws.
It is recommended that two people assemble the desk, and a
powered screwdriver is required for assembly. For any questions or
concerns, you can contact Knight at 0800 143 143. Please note that
due to continuous improvement of the product, the assembly
instructions may not be in complete accordance with the
product.
Ergoplan Desk 1200 Product Usage Instructions
Step 1: Preparation
- Insert cam bolts (c1) into panels A, X, and Z.
- Insert dowel pins (d1) into panels X, Z, and D.
Step 2: Panel Assembly
- Insert cam bolts (c1) on panels X and Z into cams on panel D
and tighten in a clockwise direction. - Secure panel X & D and panel Z & D with bracket (b1)
using screws (s1).
Step 3: Top Panel Assembly
- Insert cam bolts (c1) on panel A into cams on panels Z, D, and
X and tighten in a clockwise direction. - Cover top of cams with cam stickers (c2).
- Turn desk over to upright position.
Please note that it is recommended that two people assemble the
desk, and a powered screwdriver is required for assembly.
Ergoplan Desk 1200
Assembly Instructions
Tools Required: Powered Screwdriver
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete understanding of the product. It provides you with important information about the safety, use, installation and maintenance. WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY. SAFETY · The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby. · Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator. · Don’t put high-temperature or frozen objects on furniture. · Safely carry product to location of assembly. · Retain this operation manual and pass it on to any future owner. SET UP AND INSTALLATION · Assemble the product according to the assembly instructions. · To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging. · Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people. Any questions contact Knight on 0800 143 143 Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product and we apologise in advance.
Recommended 2 Person Assembly
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Parts
Item A X Z D
Description Top Panel
Left Side Panel Right Side Panel Modesty Panel
Quantity 1 1 1 1
The turning direction of attaching
Incorrect Correct
A Z
D X
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Parts
Item c1 d1 c2 b1 s1
Description 6×35 Cam Bolt 8×30 Dowel Pin
Cam Sticker Bracket
3.5×15 Screw
Quantity 10 10 10 4 16
c1 6×35 Cam Bolt
d1 8×30 Dowel Pin
c2 Cam Sticker
b1 Bracket
s1 3.5×15 Screw
Cam (pre-installed)
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Step 1
Preparation for top panel A, left side panel X, right side panel Z and modesty panel D. 1. lnsert cam bolts (c1) into panels A, X and Z. 2. Insert dowel pins (d1) into panels X, Z and D.
Page 1
c1 d1
c1 X d1
Z
A
d1 knightgroup.co.nz
D d1
Ergoplan Desk 1200
Assembly Instructions
Page 2
Step 2
Left side panel X, right side panel Z, and modesty panel D assembly. 1. Insert cam bolts (c1) on panels X and Z into cams on panel D and tighten in a clockwise direction. 2. Secure panel X & D and panel Z & D with bracket (b1) using screws (s1).
D Z
b1 s1
X
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Page 3
Step 3
Top panel A assembly. 1. Insert cam bolts (c1) on panel A into cams on panels Z, D and X and tighten in a clockwise direction. 2. Cover top of cams with cam stickers (c2). 3. Turn desk over to upright position.
D c2
c2 X
c2
Z A
knightgroup.co.nz
Ergoplan Desk 1200
Assembly Instructions
Complete
Page 4
knightgroup.co.nz
Knight Group
