Ergoplan Canteen Table
Ergoplan Canteen Table
The Ergoplan Canteen Table is a sturdy table designed for use in
canteens and dining areas. It requires assembly, and it is
recommended that two people assemble the table. If you have any
questions about the assembly process, please contact Knight at 0800
143 143. Please note that due to continuous improvements to our
products, the assembly instructions may not be in complete
accordance with the product, and we apologize in advance.
Tools Required
To assemble the Ergoplan Canteen Table, you will need a powered
screwdriver.
Parts
| Item | Description | Quantity |
|---|---|---|
| A | Top Panel | 1 |
| B | Legs | 2 |
| C | Rails | 2 |
| Item | Description | Quantity |
|---|---|---|
| 1 | M8x25 Screw | 4 |
| 2 | 6mm Allen Key | 1 |
| 3 | 4×40 Screw | 6 |
| 4 | 4×16 Screw | 4 |
Assembly Instructions
Step 1
Attach the legs to the rails using the M8x25 screws and the
allen key. There are two rails and two legs.
Step 2
- Place the top panel on a level surface.
- Turn the frame over and align it on top of the panel.
- Attach the frame to the top panel using the 4×40 screws and the
4×16 screws. - Turn the table over to an upright position.
Once you have completed these steps, your Ergoplan Canteen Table
is ready to use.
Ergoplan Canteen Table
Assembly Instructions
Tools Required: Powered Screwdriver
knightgroup.co.nz
Ergoplan Canteen Table
Assembly Instructions
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete understanding of the product. It provides you with important information about the safety, use, installation and maintenance. WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY. SAFETY · The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby. · Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator. · Don’t put high-temperature or frozen objects on furniture. · Safely carry product to location of assembly. · Retain this operation manual and pass it on to any future owner. SET UP AND INSTALLATION · Assemble the product according to the assembly instructions. · To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging. · Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people. Any questions contact Knight on 0800 143 143 Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product and we apologise in advance.
Recommended 2 Person Assembly
knightgroup.co.nz
Ergoplan Canteen Table
Assembly Instructions
Parts
Item A B C
Item 1 2 3 4
Description Top Panel Legs Rails
Description M8x25 Screw 6mm Allen Key 4×40 Screw
4×16 Screw
Quantity 1 2 2
Quantity 4 1 6 4
The turning direction of attaching
Incorrect Correct
A
B C
1 M8x25 Screw
2 6mm Allen Key
3 4×40 Screw
4 4×16 Screw
knightgroup.co.nz
Ergoplan Canteen Table
Assembly Instructions
Step 1
Fix legs to rails with screws (1) using the allen key.
Page 1
B
2 1 C
knightgroup.co.nz
Ergoplan Canteen Table
Assembly Instructions
Step 2
1. Place top panel on level suface. Turn frame over and align on top panel. 2. Fix frame to top panel using screws (3) and (4). 3. Turn table over to upright position.
Page 2
4 3
C
4
B
3
A
knightgroup.co.nz
Ergoplan Canteen Table
Assembly Instructions
Complete
Page 3
knightgroup.co.nz
Knight Group
