K6746X 6 Inch 152.4 mm Deep Drainable Louver
Product Information:
Part Number: 475584
Model: K6746X
This product is a louver designed for installation in a specific
equipment or system. It is important to follow the installation,
operation, and maintenance instructions provided in this manual to
ensure proper functioning and longevity of the product.
Product Usage Instructions:
Receiving and Handling:
- Upon receiving the louver(s), carefully inspect for any visible
damage. - If any damage is found, record all necessary information on the
bill of lading. - File a claim with the final carrier for any damages.
- Check and ensure that all parts of the shipment, including
accessories, are accounted for.
Safety Warning:
It is important to follow safety guidelines to prevent property
damage, injury, or death. Before installing or servicing this
equipment, thoroughly read and understand the installation,
operating, and maintenance instructions provided in this
manual.
Storage:
Store the louver(s) in a clean, dry, and secure location. Avoid
exposing it to extreme temperatures, moisture, or direct sunlight.
Proper storage will help maintain the integrity and functionality
of the product.
Maintenance:
Regular maintenance is crucial to ensure optimal performance of
the louver(s). Follow the maintenance instructions provided in this
manual, including cleaning recommendations, lubrication
requirements, and inspection schedules. Adhering to these
guidelines will help extend the lifespan of the product.
Warranty:
Details about the warranty coverage for this product are not
provided in this text-extract. Please refer to the complete user
manual or contact the manufacturer for warranty information.
Part # 475584
Installation, Operation and Maintenance Instructions Model K6746X
This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the job is complete.
RECEIVING AND HANDLING
Upon receiving the louver(s), check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for.
SAFETY WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.
STORAGE
The louvers and components are shipped in semi-enclosed wooden crates, and should be left in the crate until ready for installation. Inside storage is preferable. If outside storage is required, the crates should be blocked up or otherwise elevated from the ground or pavement, and covered securely with waterproof coverings of plastic film. Wraps “Coverall” or “Visqueen” film sheeting is recommended as adequate protection, however, any plastic film waterproof sheeting of equal quality is acceptable. Louvers and components are not wrapped or protected from moisture or dirt within the wooden crates. If prolonged storage is anticipated, either inside or out in the weather, adequate steps should be taken to protect the units and their finishes. It is also possible to order individual section plastic wrap when long term storage is anticipated. Handling to and from storage should be accomplished with the wooden crates intact. Physical damages, marred finishes, loss of loose parts and fasteners, and separation of associated components may occur if crates are dismantled and louver components removed to facilitate storage.
MAINTENANCE
Stationary or fixed blade louvers require no maintenance to remain functional. The louver finish may be subject to deterioration dependent solely upon the environment in which sun controls are installed. Appearance and longevity of the finish may be greatly extended by an occasional cleaning, the frequency of which, is again solely dependent upon the environment. Proper cleaning may be accomplished with the use of a light scrubbing action, used in conjunction with a good grade of common household mild detergent. Harsh acidic or caustic cleaners are not recommended. Under no condition should the louver or component finish be scrubbed with an abrasive cleaner or apparatus.
WARRANTY
Airolite warrants this equipment to be free from defects in material and workmanship for a period of one year from the shipment date. Any units or parts which prove to be defective during the warranty period will be repaired or replaced at our option. Airolite shall not be liable for damages resulting from misapplication or misuse of its products. Airolite will not be responsible for any installation or removal costs. Airolite will not be responsible for any service work or backcharges without prior written authorization.
Copyright © 2012 The Airolite Company, LLC Part# 475584 June 2012 Rev 1
