AFP-200 Dress Panel Backbox
Product Information:
The AFP-200 Door, Backbox, and Dress Panel Assembly is a
component of the AFP-200 fire alarm control panel system.
AFP-200 Door:
The door is a part of the assembly that provides access to the
internal components of the fire alarm control panel. It is designed
to fit securely onto the backbox.
AFP-200 Backbox:
The backbox is a housing unit that holds the fire alarm control
panel and other necessary components. It provides protection and
support for the internal components.
AFP-200 Dress Panel:
The dress panel is an optional decorative cover that can be
installed over the backbox to enhance the aesthetics of the fire
alarm control panel system.
AFP-200 Backbox Mounting Dimensions:
| Dimension | Measurement |
|---|---|
| Width | 14.50 in. (36.83 cm.) |
| Height | 12.50 in. (31.75 cm.) |
| Thickness | 0.250 in. (0.635 cm.) |
Product Usage Instructions:
- Ensure that the AFP-200 Door, Backbox, and Dress Panel Assembly
is compatible with your fire alarm control panel system. - Start by installing the backbox in a suitable location,
following the provided mounting dimensions. - Once the backbox is securely mounted, align the door with the
backbox and attach it using the provided fasteners. - If desired, install the dress panel over the backbox for
enhanced aesthetics. Secure it according to the provided
instructions. - Ensure that all components are properly aligned and securely
attached. - Refer to the fire alarm control panel system’s user manual for
further instructions on operating and maintaining the system.
AFP-200 Door, Backbox, and Dress Panel Assembly
12 Clintonville Road, Northford, CT 06472 (203) 484-7161 Fax: (203) 484-7118
AFP-200
Door, Backbox, & Dress Panel Assembly
P/N 50422:A1 04/30/2003 ECN 02-623
Assembly
Carefully unpack the door, backbox, and dress panel and check for shipping damage. The AFP-200 door, backbox, and dress panel should be assembled as shown in the drawing below. Refer to the following page for backbox dimensions. The cabinet should be mounted in a clean, dry, vibration-free area where extreme temperatures are not encountered. The area should be readily accessible with sufficient room to easily install and maintain the panel. Locate the top of the cabinet approximately five feet above the floor with the hinge mounting on the left. For more information on installation of the AFP200, refer to the AFP-200 Analog Fire Panel Instruction Manual, Notifier Document 15511.
Door
www.PDF-Zoo.com
Dress Panel
fireDoaculmaernmt 50r42e2sRoevuAr1c0e4/3s0/.0c3 om
Backbox 1
AFP-200 Backbox Mounting Dimensions
14.50 in. (36.83 cm.) 12.50in. (31.75 cm.)
0.250in. (0.635 cm.)
0.500 in. (1.270 cm.)
1.00 in. (2.54 cm.)
0.500 in. (1.270 cm.)
1.00 in. (2.54 cm.)
16.00 in. (40.64 cm.)
9.00 in. (22.86 cm.)
0.250 in. Ø (0.635 cm.)
www.PDF-Zoo.com
2
fireDaocluamremnt 5r04e22soReuv Ar1ce04s/30./c03om
Fire Alarm Resources | Download fire alarm documents
