LEVITON Decora Edge™ Wiring Device Instructions
Product Information
Leviton Decora Edge devices are electrical outlets and switches that have a slim profile design with a square shape. They are available in various colors and finishes to match any home décor. The Decora Edge devices utilize a screw clamp terminal for easy installation and have a voltage rating of 125VAC.
- Termination Type: Screw Clamp
- Wire Compatibility: Copper or Copper clad
- UL Certification: Yes
If you need more information on Leviton Decora Edge devices, you can visit leviton.com/DecoraEdge
Product Usage Instructions
- Before installation, turn off the power supply to the electrical box where the Decora Edge device will be installed.
- Remove the old device from the electrical box and disconnect the wires from the old device.
- Connect the wires to the Decora Edge device screw clamp terminals.
- Ensure that the wires are tightly secured to the screw clamp terminals.
- Carefully insert the Decora Edge device into the electrical box and attach it using the provided screws.
- Turn on the power supply to the electrical box and test the Decora Edge device.
- If you need to rewire the Decora Edge device for future applications, repeat steps 1 through 6.
Note: If you are not familiar with electrical installations, it is recommended that you seek assistance from a licensed electrician.
Compliance FAQs
Leviton’s new Decora Edge provides the classic appearance of Decora® devices in a faster, easier-to-install, and safer design.
• Decora Edge is an innovative wiring device featuring easy termination for a faster, safer installation. Decora Edge presently includes a single pole switch, a 3-Way switch and a 15-amp duplex receptacle (NEMA 5-15R).
• A unique and patent-pending Spring Action Clamp terminal, where the stripped end of a conductor is inserted into the terminal and a manually operated integral lever applies clamping pressure to a spring mechanism, without the use of screws.
• The spring action clamp is NOT to be confused with Quickwire™ push-in (stab) or back-wire clamp terminations.
• Lever connectors work with both 14 gauge and 12 gauge stranded and solid copper wire only, no aluminum or copper clad wire.
• Yes, one advantage of Decora Edge devices is that they can be removed and terminated again.
• Yes, Decora Edge is compliant with the National Electrical Code® (NEC).
• 
Yes
• UL 498: File E13399
• UL 20: File: E7458
Scan to learn more.
leviton.com/DecoraEdge
For more information visit leviton.com
© 2023 Leviton Manufacturing Co., Inc. All rights reserved. All trademarks are the property of their respective owners.
NM-102622
Leviton | Switches, Dimmers, Outlets & Lighting Controls
