Zoroufy Inspiration Stair Rods Instruction Manual (+ PDF)

Contents hide

Inspiration Stair Rods

Product Information

Product Name	Finial – Pineapple Round Urn
Product Specifications	Rod Gauge Rod Diameter: .031 3/8″ Finial Diameter: 1.38″
Installation Instructions	The carpet runner must be installed using another method of installation. Zoroufy Stair Rods are for decorative use only. Attach finials to the brackets using the small screws provided in the finials. Locate the desired position of the brackets by inserting the rod into the brackets and laying it on the stairs. Position both the left and right brackets an equal distance from the side edges of the runner for the most preferable position. For each step, install one bracket onto the stairs using the screws provided or other anchors suitable for stair material. It is recommended to drill a pilot hole first. Insert the rod into the installed bracket and place the remaining bracket on the other end to confirm the exact position of the bracket on the other side. Install the remaining bracket using the same method as mentioned above.

Important Note: All parts are lacquer coated to
resist tarnishing. Do not use brass cleaner or other abrasives. To
clean, simply wipe with a soft dry cloth. Periodically check and
tighten all screws and hardware.

View Fullscreen

FINIAL
Pineapple Round Urn
ROD GAUGE ROD DIAMETER

InspirationTM

STAIR ROD COLLECTION SPECIFICATIONS

LENGTH
1 3/8″ 3/4″ 1 1/8″
.031″ 3/8″

.5”
1.38” 0.45” 0.45”

Zoroufy® Stair Rods slide into each bracket approximately ½”. Finials attach to the bracket.

1.38”

INSTALLATION INSTRUCTIONS

Finial measurements vary by style.

Finial

Installation Screws

Rod

Finial Screw

1. The carpet runner must be installed using another method of installation. Zoroufy Stair Rods are for decorative use only.
2. Attach finials to the brackets using small screws provided in finials.
3. Locate desired position of the brackets by inserting the rod into the brackets and laying on the stairs. Positioning both the left and right bracket an equal distance from the side edges of the runner is the most preferable position.
4. For each step, install one bracket onto stairs using screws provided or other anchors suitable for stair material. Drilling a pilot hole first is recommended. Insert the rod into the installed bracket and place remaining bracket on the other end to confirm exact position of the bracket on the other side.
5. Install remaining bracket using the same method as above.

ALL PARTS ARE LACQUER COATED TO RESIST TARNISHING. DO NOT USE BRASS CLEANER OR OTHER ABRASIVES. TO CLEAN, SIMPLY WIPE WITH A SOFT DRY CLOTH. PERIODICALLY CHECK AND TIGHTEN ALL SCREWS AND HARDWARE.

2140 W. GREENVIEW DR. SUITE 5, MIDDLETON, WI 53562-0345 · 800-762-1525 · [email protected] · www.zoroufy.com