Forster Technik Tap5-ez2-32 Automatic Lamb Feeder System User Guide

FORSTER TECHNIK TAP5-EZ2-32 Automatic Lamb Feeder System

Installation checklist

This document provides a brief overview of what to consider when installing a lamb feeder.

1. Establish ground connection
   
2. Connect power
   
3. Connect water
   
   
4. Open hose fittings
   
5. Feeding station – suction hose
   
   Mount the suction hose holder for cleaning – higher than the mixer position and near the suction points.
   
6. Fix protection grid and fill the powder hopper
   
   
7. Fill boiler
   
   
8. New setup
   
   All values set back to factory settings. Boiler is filled.
9. Adjust target temperature
   
   Hint: button
   * press to stop Automatic mode
   ** press to start Automatic mode
10. Adjust portion size – Water
    
    10. Adjust portion size – Milk powder (MP)
    
11. Cleaning – Mixer
    
12. Cleaning – Suction hose
    
    

This checklist refers to the basic equipment of the Lamb Feeder. Not all available functions can be shown.
For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)