20W-25W-30W LED Tri-Proof Vapor Tight Fixture
Product Information
The LOC Tri Proof Vapor Tight Series is a durable and waterproof
lighting fixture designed for various installation options. It
features selectable wattage and color temperature settings,
allowing you to customize the lighting output to suit your needs.
The fixture is also dimmable, providing flexibility in controlling
the brightness.
Safety Instructions
Before attempting to install the fixture, carefully read and
follow the provided instructions. Ensure compliance with local
codes and ordinances to ensure safe installation. It is important
to turn off the electrical power at the fuse or circuit breaker box
before wiring the fixture to the power supply to avoid any risk of
electric shock.
Cleaning & Maintenance
When cleaning the fixture, make sure the temperature is cool
enough to touch. Do not attempt to clean or maintain the fixture
while it is energized. Clean the lens with a non-abrasive cleaning
solution. However, do not open the fixture to clean the LED, and
avoid touching the LED directly.
Troubleshooting
If you encounter any issues with the fixture, first check that
the line voltage at the fixture is correct by referring to the
wiring directions. Additionally, ensure that the fixture is
grounded properly.
Selectable Wattage and Color Temperature
The LOC Tri Proof Vapor Tight Series offers selectable wattage
and color temperature options to meet your specific lighting
requirements. The wattage options vary depending on the model:
- 2 Foot Model (LOC-2FTTPVT-MW-MCCT-D):
- Default Wattage: 30W
- Middle Wattage: 25W
- Lowest Wattage: 20W
- 4 Foot Model (LOC-4FTTPVT-MW-MCCT-D):
- Default Wattage: 50W
- Middle Wattage: 40W
- Lowest Wattage: 30W
- 8 Foot Model (LOC-8FTTPVT-MW-MCCT-D):
- Default Wattage: 100W
- Middle Wattage: 80W
- Lowest Wattage: 60W
In addition to wattage selection, you can also choose the color
temperature of the lighting:
- Highest Temperature (Left): 5,000K
- Middle Temperature (Middle): 4,000K
- Lowest Temperature (Right): 3,500K
Product Usage Instructions – Surface Mount Installation
- Turn off the electrical power at the fuse or circuit breaker
box before starting the installation process. - Open the clips on the end of the fixture.
- Pull off the end cap.
- Install the waterproof connector to the fixture.
- Connect the wires.
- Re-attach the end cap to the housing.
- Fasten the clips on the fixture.
- Install the mounting brackets to the installation surface.
- Install the fixture to the mounting brackets.
LOC Tri Proof Vapor Tight Series Installation Guide
SAFETY INSTRUCTIONS: Read instructions carefully before attempting to install fixture.
· All wiring should be performed by a qualified electrician. · Disconnect power before installing or servicing. This fixture must be wired in accordance with the National Electrical
Code and applicable local codes and ordinances.
CAUTION: Risk of fire
· WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside. · WARNING: Do NOT handle energized fixture when hands are wet, when standing on wet or damp surfaces or in
water. · WARNING: Fixture to be independently supported to building structure.
CLEANING & MAINTENANCE:
CAUTION: Be sure the fixture temperature is cool enough to touch. Do NOT clean or maintain while the fixture is energized.
1. Clean lens with non-abrasive cleaning solution. 2. Do NOT open fixture to clean the LED. Do NOT touch the LED.
Note: These instructions do not cover all details or variation in equipment, nor do they provide for every possible situation during installation, operation or maintenance.
TROUBLESHOOTING:
1. Check that the line voltage at fixture is correct. Refer to wiring directions. 2. Check that the fixture is grounded properly.
0-10V DIMMABLE WIRING:
Universal voltage driver permits operation at 120V through 277V, 50/60Hz.
1. Connect the BLACK fixture lead to the (+) LINE supply lead. 2. Connect the WHITE fixture lead to the (-) COMMON supply lead 3. Connect the GROUND wire from fixture to the supply ground. Do NOT connect the GROUND of the dimming fixture
to the output. 4. Connect the VIOLET fixture lead to the (V+) DIM lead. 5. Connect the GRAY fixture lead to the (V-) DIM lead.
`
LOC Tri Proof Vapor Tight Series Installation Guide
INSTALLATION OPTIONS: (Surface mount)
CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
SURFACE MOUNT
1. Open the clips on the end of the fixture. (Fig. 1) 2. Pull off the end cap. (Fig. 2) 3. Install the waterproof connector to the fixture. (Fig. 3) 4. Connect the wires. (Fig. 4) 5. Re-attach the end cap to the housing. (Fig. 5) 6. Fasten the clips on the fixture. (Fig. 6) 7. Install the mounting brackets to the installation surface. (Fig. 7) 8. Install the fixture to the mounting brackets. (Fig. 8)
Fig. 1
Fig. 2
Fig. 3
Fig. 4 Fig. 7
`
Fig. 5 Fig. 8
Fig. 6
LOC Tri Proof Vapor Tight Series Installation Guide
SELECTABLE WATTAGE AND COLOR TEMPERATURE:
Selecting Wattage:
1. Take the end cap off from the other side of the fixture opposite of the wiring, locate the black toggle switch inside the fixture. There is a sticker labeled to select a wattage.
2. To change the wattage, please locate the silver box with wattage. The default wattage is the highest wattage option on the fixture (left position). You can adjust this by pushing the switch to the middle or the right (lowest wattage).
2 FOOT MODEL NUMBER: LOC-2FTTPVT-MW-MCCT-D
Default Wattage (Left) 30W
Middle Wattage (Middle) 25W
Lowest Wattage (Right) 20W
4 FOOT MODEL NUMBER: LOC-4FTTPVT-MW-MCCT-D
Default Wattage (Left) 50W
Middle Wattage (Middle) 40W
Lowest Wattage (Right) 30W
8 FOOT MODEL NUMBER: LOC-8FTTPVT-MW-MCCT-D
Default Wattage (Left) 100W
Middle Wattage (Middle) 80W
Lowest Wattage (Right) 60W
Selecting Color Temperature:
1. Take the end cap off from the other side of the fixture opposite of the wiring, locate the black toggle switch inside the fixture. There is a sticker labeled to select a color temperature.
2. To change the color temperature, please select slide the switch to your choosing. The default color temperature is the highest temperature option on the fixture left side 5,000K. You can adjust this by pushing the switch to the middle 4,000K or the right side 3,500K.
`
