Igear Ig-1023 Cosmic Ambient Light & Speaker User Manual

Igear Ig-1023 Cosmic Ambient Light & Speaker User Manual

iGear iG 1023 Cosmic Ambient Light &amp Speaker - logoiG-1023 Cosmic Ambient Light & Speaker
User ManualiGear iG 1023 Cosmic Ambient Light &amp Speaker

Operation Method

iGear iG 1023 Cosmic Ambient Light &amp Speaker - figure 1

Light Mode

iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 1Flame lamp On/Off switch, quick press to Start or Stop the lamp.

Bluetooth Speaker Mode

iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 2Power On/Off Button:
Long press for 3 seconds to start the speaker, the white indicator light will start blinking and you will hear the indication tune. Search for iGear Cosmic in your Bluetooth menu. Once the speaker is paired with your device, you will hear a beeping sound, and the white indicator light will stay on continuously. Short press the button to Play/Pause.
iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 3Next Track:
Short press the button to go to the next track.
iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 4Previous Track:
Short press the button to go to the previous track.
iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 5Volume Increase Button:
Long press to increase the volume (when reaching maximum volume, the speaker will say “di di”).
iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 6Volume Decrease Button:
Long Press to decrease the volume.

Timer Mode

iGear iG 1023 Cosmic Ambient Light &amp Speaker - icon 7Timer Mode:
Long press the button to turn on or off the timer function.
The indicator light will stay on when the timer function is started. In the timer function mode, the flame lamp will stay on for 5 hours and then stay off for 19  hours and start again for 5 hours on a rotation basis till the battery is discharged.

Charging Instruction

Power Input:
Insert the USB cable into the port, when the product is charging, the red LED will stay on. Once the charging is completed the LED will go off.iGear iG 1023 Cosmic Ambient Light &amp Speaker - figure 2

Attention

  1. Please charge the product in ambient temperatures ranging from 0°C-40°C.
  2. Not recommended for charging while using.
  3. Please pull off the USB cable after a full charge.
  4. Please do not charge the product in a high humidity environment.
  5. The rechargeable lithium battery is built into the product and cannot be removed or replaced.
  6. Please charge the product once every month when not in use.
  7. Please do not damage the mainframe.
  8. Please do not use benzene, diluent, and other chemicals to clean the surface.
  9. Please do not place it close to magnetic and electric field.
  10. Please avoid keeping it under direct sunlight or near heating appliances.
  11. Please do not repair, disassemble, or transform the product by yourself.

Technical Parameters

Bluetooth VersionV4.2
Bluetooth NameiGear Cosmic
Bluetooth Transmission Distance≤10M
Output Power10W
Speaker ParametersΦ 52MM 4Ω8W
Number of leds120pcs
Distortion Rate≤10%
SNR>75dB
Power Supply5V 1A
Built-in High Efficiency Lithium Battery3.7V 3600mAh

iGear iG 1023 Cosmic Ambient Light &amp Speaker - logoImported and Marketed By:
IGear Tech Pvt. Ltd.
204, Sai Corporate Park,
Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai – 400104.
In case of consumer complaints:
Toll-free number – 1800 22 8495
Email: [email protected]
(Between 10 am to 5 pm, Mon- Fri)

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals