F22.1 1-10 Scale Electric Formula Car
Product Information
The F22 is a 1/10 scale formula car that comes with an
instruction manual. It is designed for individuals over 16 years
old who have experience with rc model cars. If children or
individuals without experience will be using the product, direct
supervision of a knowledgeable adult is required. The car has
adjustable front toe, camber, and caster, adjustable rear height, a
bumper/front backstop, a 2mm carbon chassis, full ball bearing, and
an adjustable differential. The car requires additional items for
completion, including an electric motor pinion gear, low profile
steering servo, transmitter batteries for the transmitter, receiver
wheel, tires, and inserts. The kit includes a lipo battery and
speed controller. The product is manufactured by W.R.C. world
racing car s.r.l and customers can contact them for support at
[email protected].
Product Usage Instructions
- Read and fully understand the instruction manual before
assembling and operating the product. - Keep the instruction manual in a safe place for future
reference. - Use only original WRC spare parts.
- The product requires additional items for completion that are
not included in the kit. These items include an electric motor
pinion gear, low profile steering servo, transmitter batteries for
the transmitter, receiver wheel, tires, and inserts. These items
can be obtained from a local hobby shop. - Tools required for proper assembly include allens (1.5 mm, 2
mm, 3 mm), socket (5mm, 7mm), side cutters, combination pliers,
scissors, tool for turnbuckles/nuts, grease, and oils (bearing oil
silicone oil). - When assembling the product, ensure that the parts are oriented
properly and follow the instructions completely. - The carbon arm should be fit on the rear holes (blue). Use the
lower holes to move the support longitudinally and change the
wheelbase setting: red for short wheelbase, better turning but less
stable; blue for long wheelbase, more stable but less sharp in
corners.
INTRODUCTION
F22 is a new generation high quality 1/10 scale formula car. F22 is supplied in a box equipped with Instruction Manual. Its use is intended for more than 16 years old persons with experience on rc model car field. Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.
SAFETY PRECAUTIONS
Instruction Manual MUST be read and fully understood before to start building and operating functions. Always keep Instruction Manual in safety place, ready to be consulted for any reference you need. Use only original WRC spare parts.
GENERAL INFORMATION
Assemble the kit only away from the reach of children. Follow the building and operating instructions using the utmost care. Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury. Check and clean the model before putting it away. Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic. The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision. Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model. Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter. Keep the wheels of the model off the ground when checking the operation of the radio equipment. Disconnect the battery pack before storing your model.
WARRANTY
WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty doesn’t cover any components damaged by use or modification or as result of wear. Part or parts missing from this kit must be reported within 30 days of purchase. No part or parts will be sent under warranty without proof of purchase. If you find a defective or missing part, contact the local distributor. Customer service and support will be provided through local hobby store. No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement. Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use. This includes but is not limited to damage from crashing, excessive moistur, improper use or no maintenance or user modifications which compromise the integrity of components. Warranty will not cover compnents that are considered consumable on RC model car. WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty. WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:
CUSTOMER SUPPORT
Please don’t hesitate to contact WRC support at [email protected] for any problem or question. Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option parts and other information.
W.R.C. world racing car s.r.l.
Via A.Volta 2BIS 36040 Brendola (VI)
ITALY
Phone: 0039 0 444 1792263 E-mail: [email protected] Website: www.wrc-racing.com
TECHNICAL INFORMATION
– TRANSMISSION: 2 DRIVE WHEELS – BODY: LEXAN FORMULA MODEL (NOT INCLUDED) – ADJUSTABLE FRONT TOE, CAMBER AND CASTER – ADJUSTABLE REAR HEIGHT – BUMPER /FRONT BACKSTOP – CARBON CHASSIS 2mm – FULL BALL BEARING – ADJUSTABLE DIFFERENTIAL
TECHNICAL DATA
– LENGHT ………………………………………418 MM. – WIDTH ………………………………………190 MM. – ADJUSTABLE WHEEL BASE …………269-265MM. – WEIGHT CHASSIS…………………………1080 GR.
ADDITIONAL ITEMS NEEDED FOR COMPLETION (REQUIRED BUT NOT INCLUDED IN THE KIT)
ELECTRIC MOTOR PINION GEAR
LOW PROFILE STEERING SERVO
TRANSMITTER BATTERIES FOR TRANSMITTER
RECEIVER WHEEL – TYRES – INSERTS
INCLUDED
LIPO BATTERY
SPEED CONTROLLER
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
LEXAN BODY + DECALS
INCLUDED
ALLENS: 1.5 mm 2 mm 3 mm
SOCKET 5mm 7mm
SIDE CUTTERS
COMBINATION PLIERS
SCISSORS
TOOL FOR TURNBUCKLES/NUTS
GREASE
OILS: BEARING OIL SILICONE OIL
NOTICE:
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE LM16; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP. BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
2
BAG 1
HEIGHT LIKE THE SCREW
03426 03472
03472
94009 M3 03138 Hard (Black)
also in kit: Soft (Gold) 03472
02022-1 02003 02035
ADJUST PLAY
ADJUST UNIBALL POSITION TO OBTAIN “ZERO PLAY”
03418
02028 02008-5
02035
92001 M3 x6
92012 M3 x25
92001 M3 x6 93002 M3 x8
92001 M3 x6
03417-3
02003
INSERT WITH PRESSURE
03472
92001 M3x6
BAG 2
02014-1
03472 03431-2
3mm
This part is not simmetric, make sure it’s horiented properly.
02022-1
02003
92001 M3x6
92001 M3x6
02003 02014-4
Fit the carbon arm on the Rear Holes (Blue).
Use the lower holes to move the support longitudinally and change wheelbase setting: RED – Short wheelbase, better turning but less stable BLUE – Long wheelbase, more stable but less sharp in corners.
3
BAG 3
GREASE SHIMS AND BALLS
COD. RC0028
TOWARDS ASSEMBLY
02018
97006 Ø2×9
03454-10
7,8 3
3,2 8
GREASE
98000 M3x3 03454-4
94009 M3
03454-1 90001 6x10x3 03454-3 90023 3x8x3.5
97017 Ø2×14
02019-3
03454-6
03423-90
90001 6x10x3
02041-1 OPTIONAL CERAMIC
02041
02014-1 93001 M3X6
93001 M3X6
02015-1 6x9x0.5 03424
BAG 4
90001 6_10_3
03428
02012
93001 M3 x6
03425
02015-2
93010 M2.5 x 5
02015-1 6x9x0.5
OFFSET
-3 MM. -2 MM. -1 MM. 0 MM. +1 MM. +2 MM. +3 MM.
92001 M3 x6
4
03044
93001 M3 x6
03276 93001 M3 x6
BAG 5
03069 93005 M3 x14 03422-2 OPTIONAL 03422-1
03035-4
03430 02014
92003 M3 x10
This part has to be mounted together with optional part n.02030-2. (pag. 9)
03200-2 3×5.5X2
02014
02070-1
92001 M3 x6
92001 M3 x6
CASTER
9° (standard)
In Kit
BAG 6
03035-4
03262
93001 M3 x6
03421-1 98004 M3x12
02014-3
93001 M3 x6 03416
03035-4 03416
03420 03044 02014-1
5
02011
93001 M3 x6
03409
93002 M3 x8 03055-2 03055-2
BAG 7
03061-35 02011
02081
93011 M3x25
03409 02020-3
NOT INCLUDED
USE SHIMS TO ADJUST SERVO HEIGHT 90008 6_10_3
02081 TIGHTEN THE NUT UNTIL TO ITS TOP SITS TO THE END
OF THE SREW
Adjust position based front arm position (pag. 3). RED – Short wheelbase BLUE – Long wheelbase
03416 Ø3x7x0.5
03270 94009
M3
02020-6 03409
93001 M3 x6
93001 M3 x6
02014-1 700005
Adjust position based on
92002
lenght of car/wheelbase setting.
M3x8
92001 M3 x6
6
BAG 8
02017
02016
03139-6 03136
GLUE
WHEELBASE POSITION
02057 Medium also in kit: Soft -Hard
LONG
SHORT
02002
98000 M3x3
03139 02003 OPTIONAL ALU 03200-1 (1mm) 03200-2 (2mm)
RIDE HEIGHT ADJUSTMENT
TO LOWER CAR
TO LIFT UP THE CAR
02011
03061-35
02011
x2
RIGHT – LEFT
22,5
03409-1
03409-1
7
BAG 9
95013 12×1 02043-8 02043 95016
QUADRI RING
03170-1
02043
03170-2
03170-7
03087
COD 03170-5
SPRINGS Force (lb) COLOUR
2.1 BLACK
03170-6
2.2 YELLOW
03170-7 03170-8
2.3 RED IN KIT 2.6 BLUE
PROGRESSIVE SPRINGS 03170-9 1.3-2.9 FUCHSIA
03170-10 1.4-3.5 GREEN
03087
03170-3 03087
02043-9 03170-11 (OPTIONAL)
02043 5 HOLES 99003
03170-4
1
2
3
4
5
6
10
SHOCK FILLING
Fully extend the piston rod so the piston is at the bottom of the shock body. Hold the shock upright and fill the shock body with shock oil as in the picture. Let the oil settle and allow air bubbles to rise to the top. Slowly move the piston up and down until no more air bubbles appear. Add shock oil as necessary. Pull the piston rod most of the way out of the shock bod. Let the shock rest for 5 minutes to allow the air bubbles to scape.
P-ONE SHOCKS OIL
CODE SO-350
CST 350
SO-400
400
SO-450
450
SO-500
500
SO-550
550
SO-600
600
SO-650
650
SO-700 SO-800
700(IN KIT) 800
8
BAG 1O
FRICTION 02068
03003-2
OPTIONAL 02030-2
This part has to be mounted together with optional part n.03422-1. (pag. 5)
02030-4
GREASE
93001 M3 x6
03044 03069 03276 3x7x2
92001 M3 x6
02038
92002 M3 x8
03200-1 3X5.5X1
03035-6 92003 M3 x10
92002 M3 x8
9
93001 M3 x6
BAG 11
700002 93001 M3 x6 02045
Front wing has to be trimmed to fit on the car, remove the area marked in red below.
6mm
92001 M3 x6
92001 M3 x6
BALL DIFFERENTIAL ADJUST SCREW THE NUT UNTIL IT RESTS
AFTER THAT SCREW AGAIN HALF A TURN
03080-3
92021 M4x10
700004
93002 M3 x8
700001
TRASMITTER NOT INCLUDED
RC 6032 NOT INCLUDED
93102 NOT INCLUDED
RECEIVER NOT INCLUDED
DOUBLE SIDE TAPE
94004
90000 5_10_4
03225 5x10x0.2
03225 5x10x0.2
94004 90000 5_10_4
1O
Cut full shape 02039
BAG 12
93001 M3 x6
HALO 02024-17
95000 OR 101 93001 M3 x6
02040
02039
02024-15 FR OPTIONAL 02024-15 RB
11
NAME DATE TRACK
TRACK CONDITION
SURFACE
CARPET TRACTION
ASPHALT
LOW
MEDIUM HIGH
DRIVE RATIO
PINION
SPUR
90
LOSE
BALL DIFF.
TIGHT
TYRES FRONT REAR
MODE P-ONE P-ONE
TYPE P01 P01
SPRINGS
FRONT
GREY
G
REAR
GOLD GLD
DAMPER
RED
R
OIL
VISCOSITY
DAMPER SIDE SHOCK
700 100000
PISTON HOLES
5 HOLES
REAR WING
1 LOW 2 MEDIUM 3 HIGH
HEIGHT ADJUST.
1°
OUT IN
TOE
1°
IN 0UT
2
VIEW FROM TOP CASTER
3°
WHEELBASE
6°
Long
Short
9°
1
1
2
BATTERY
POSITION
2
12°
ACKERMANN
1 2
1.5
+-
FRONT CAMBER
1.5
-+
REAR HEIGHT
-3 MM. -2 MM. -1 MM. 0 MM. +1 MM. +2 MM. +3 MM.
ABSORBER
123 O-RING
REAR WING
POSITION
LONG
SHORT
R
G
G
ABSORBER
RACING.COM - YOUR RACING CONNECTION
Home - WRC
