Wrc F22.1 Scale Electric Formula Car Instruction Manual (+ PDF)

Contents hide

2 Product Information: 1/10 Scale Electric Formula Car

F22.1 Scale Electric Formula Car

Product Information: 1/10 Scale Electric Formula Car

The F22 is a high-quality 1/10 scale touring car supplied with
an instruction manual and intended for use by persons over 16 years
old with experience in the RC model car field. Children and persons
without this experience must have direct supervision from a
knowledgeable adult responsible for them. The car comes with
adjustable front toe, camber, and caster, adjustable rear height, a
bumper/front backstop, a 2mm carbon chassis, full ball bearings,
and an adjustable differential. The car’s technical data includes a
length of 418mm, width of 190mm, adjustable wheelbase of 269-265mm,
and a chassis weight of 1080g. Additional items required for
completion include an electric motor pinion gear, low profile
steering servo, transmitter, receiver, batteries for transmitter,
Lipo battery, speed controller, and tools.

Product Usage Instructions:

Read the instruction manual thoroughly before starting building
and operating functions. Keep the instruction manual in a safe
place for future reference.
Use only original WRC spare parts to maintain the car’s
quality.
Ensure you have all the additional items required for
completion before starting assembly.
Use the required tools listed in the manual for proper
assembly.
Adjust the uniball position to obtain zero play.
Grease shems and balls COD. RC0028 towards assembly.
Consult WRC support at [email protected] or visit their
website www.wrc-racing.com for any problem or question.

Note: The product is not recommended for children or persons
without experience in the RC model car field. Direct supervision
from a knowledgeable adult is required for such individuals.

View Fullscreen

1/10 SCALE ELECTRIC FORMULA CAR

INTRODUCTION
F22 is a new generation high quality 1/10 scale touring car. F22 is supplied in a box equipped with Instruction Manual. Its use is intended for more than 16 years old persons with experience on rc model car field. Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.
SAFETY PRECAUTIONS
Instruction Manual MUST be read and fully understood before to start building and operating functions. Always keep Instruction Manual in safety place, ready to be consulted for any reference you need. Use only original WRC spare parts.
GENERAL INFORMATION
Assemble the kit only away from the reach of children. Follow the building and operating instructions using the utmost care. Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury. Check and clean the model before putting it away. Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic. The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision. Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model. Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter. Keep the wheels of the model off the ground when checking the operation of the radio equipment. Disconnect the battery pack before storing your model.
WARRANTY
WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty doesn’t cover any components damaged by use or modification or as result of wear. Part or parts missing from this kit must be reported within 30 days of purchase. No part or parts will be sent under warranty without proof of purchase. If you find a defective or missing part, contact the local distributor. Customer service and support will be provided through local hobby store. No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement. Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use. This includes but is not limited to damage from crashing, excessive moistur, improper use or no maintenance or user modifications which compromise the integrity of components. Warranty will not cover compnents that are considered consumable on RC model car. WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty. WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:
CUSTOMER SUPPORT
Please don’t hesitate to contact WRC support at [email protected] for any problem or question. Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option parts and other information.
W.R.C. world racing car s.r.l.
Via A.Volta 2BIS 36040 Brendola (VI)
ITALY
Phone: 0039 0 444 1792263 E-mail: [email protected] Website: www.wrc-racing.com

TECHNICAL INFORMATION
– TRANSMISSION: 2 DRIVE WHEELS – BODY: LEXAN FORMULA MODEL (NOT INCLUDED) – ADJUSTABLE FRONT TOE, CAMBER AND CASTER – ADJUSTABLE REAR HEIGHT – BUMPER /FRONT BACKSTOP – CARBON CHASSIS 2mm – FULL BALL BEARING – ADJUSTABLE DIFFERENTIAL

TECHNICAL DATA
– LENGHT ………………………………………418 MM. – WIDTH ………………………………………190 MM. – ADJUSTABLE WHEEL BASE …………269-265MM. – WEIGHT CHASSIS…………………………1080 GR.

ADDITIONAL ITEMS NEEDED FOR COMPLETION (REQUIRED BUT NOT INCLUDED IN THE KIT)

ELECTRIC MOTOR PINION GEAR
LOW PROFILE STEERING SERVO

TRANSMITTER

RECEIVER

BATTERIES FOR TRANSMITTER

WHEEL – TYRES – INSERTS INCLUDED

LIPO BATTERY

SPEED CONTROLLER

TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY

LEXAN BODY + DECALS
INCLUDED

ALLENS: 1.5 mm 2 mm 3 mm

SOCKET 5mm 7mm

SIDE CUTTERS

COMBINATION PLIERS

SCISSORS

TOOL FOR TURNBUCKLES/NUTS

GREASE

OILS: BEARING OIL SILICONE OIL

NOTICE:
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE LM16; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP. BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
2

BAG 1

03426 03472

03472

HEIGHT LIKE THE SCREW

94009 M3

03138 (Gold) 03138-1 OPTIONAL (Black) 03472
02022-1 02003 02035

PLAY ADJUST
ADJUST UNIBALL POSITION TO OBTAIN “ZERO PLAY”

03418

02035

92001 M3 x6

92012 M3 x25
92001 M3 x6

BAG 2

93002 M3 x8

92001 M3 x6

02028 02008-5
03417-3

02003
INSERT WITH PRESSURE

03472

92001 M3x6

02022-1

02014-1

03472 03431-2
3mm

92001 M3x6
02014-4

02003

92001 M3x6

BAG 3
GREASE SHEMS AND BALLS COD. RC0028 TOWARDS ASSEMBLY

97005 Ø2×10 02018

03454-10

7,8 3
3,2 8

GREASE

98000 M3x3 03454-4
94009 M3

03454-1 90001 6x10x3 03454-3 90023 3x8x3.5

97017 Ø2×14

02019-3

03454-6

03423-90

90001 6x10x3

02041-1 02041 (CERAMIC) OPTIONAL

BAG 4
02014-1 93001 M3X6

93001 M3X6

90001 6_10_3

03428

02012

93001 M3 x6
03425

02015-2

93010 M2.5 x 5

02015-1 6x9x0.5

OFFSET
-3 MM. -2 MM. -1 MM. 0 MM. +1 MM. +2 MM. +3 MM.

02015-1 6x9x0.5 03424

92001 M3 x6

BAG 5

93001 M3 x6

03035-4 03044

93001 M3 x6 03422-2

03069 93005 M3 x14
03276

03430 02014

92003 M3 x10
03200-2 3×5.5X2
02070-1

02014

BAG 6

92001 M3 x6

93001 M3 x6 03035-4

03416

93001 M3 x6

03262
9°

CASTER 9°
03035-4 03416
03420-1 03044

03421-1 98004 M3x12

02014-3
5

BAG 7
02011
93001 M3 x6
03409
93002 M3 x8 03055-2 03055-2

03061-35 02011

02081

93011 M3x25
03409 02020-3

NOT INCLUDED

USE SHIMS TO REGULATE SERVO HEIGHT 90008 6_10_3

02014-1
02081
TIGHTEN THE NUT UNTIL TO ITS TOP SITS TO THE END
OF THE SREW

03416 Ø3x7x0.5
03270 94009
M3

02020-6

03409

93001 M3 x6

02014-1

700005

92002

M3x8

92001 M3 x6

BAG 8

02016

03139-6 03136

GLUE

WHEELBASE POSITION

02003 02003
02017 02011

02002 98000 M3x3 03139 OPTIONAL ALU
03200-1 03200-2
02057 02057-1 SET OPTIONAL (SOFT-MEDIUM-HARD)

LONG

SHORT

HEIGHT ADJUSTMENT

TO LOWER CAR

TO LIFT UP THE CAR

03061-35

02011

x2
RIGHT – LEFT
18,5

03409-1

03409-1
7

BAG 9

03170-1 95001 12×1,6 02043-8 02043 95016
QUADRI RING
02043 03170-2

03170-7

03087

COD 03170-5

SPRINGS Force (lb) COLOUR
2.1 BLACK

03170-6

2.2 YELLOW

03170-7 03170-8

2.3 RED IN KIT 2.6 BLUE

PROGRESSIVE SPRINGS 03170-9 1.3-2.9 FUCHSIA

03170-10 1.4-3.5 GREEN

03087

03170-3 03087

02043-9 03170-11 (OPTIONAL)

02043 5 HOLES 99003

03170-4

SHOCK FILLING
Fully extend the piston rod so the piston is at the bottom of the shock body. Hold the shock upright and fill the shock body with shock oil as in the picture. Let the oil settle and allow air bubbles to rise to the top. Slowly move the piston up and down until no more air bubbles appear. Add shock oil as necessary. Pull the piston rod most of the way out of the shock bod. Let the shock rest for 5 minutes to allow the air bubbles to scape.

P-ONE SHOCKS OIL

CODE SO-350

CST 350

SO-400

400

SO-450

450

SO-500

500

SO-550

550

SO-600