Nedis Aipu200cwt Air Purifier User Manual (+ PDF)

Product	Air purifier
Article number	AIPU200CWT
Dimensions (l x w x h)	355 x 205 x 530 mm
Applicable area	< 25 m²
Clean air delivery rate	200 m³ / h
Noise level	35 – 54 dB
Operating temperature	-10 °C – 40 °C
Operating humidity	< 95 % RH
Power supply	220 – 240 VAC ~ 50 / 60 Hz
Rated power	50 W
Standby power	0.5 W

Main parts (image A)

19592 1422 Nedis Air Purifier AIPU200AF Toollist v00.02

1. Air quality indicator

2. LED display

3. Air filter

4. Filter cover

5. Power cable

6. Sensor cover

7. Air quality sensor

Interface (image B)

19592 1422 Nedis Air Purifier AIPU200AF top view v00.02

1. On / off indicator

2. Fan speed indicator / Auto mode

3. Sleep mode indicator

4. Air intake / Air outlet

5. Timer indicator

6. Anion indicator

7. Air quality indicator

8. Filter indicator

9. Filter button

10. Air quality button

11. Anion button

12. Timer button

13. Sleep mode button

14. Fan speed button

15. On / off button

Safety instructions

WARNING

Read the instructions before use.
Only use the product as described in this manual.
Do not connect a bound cable to the power outlet.
Only use the product indoors.
Do not use a damaged product.
Do not use the product in wet or damp environments.
Do not insert any objects into the product.
Do not place the product near gas, an electric burner or a heated oven.
Do not let the power cable touch hot surfaces.
Do not place items on top of it.
Do not use the power cable to carry the device.
If servicing is needed, refer to qualified personnel.
Do not cover ventilation openings.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Removing the packaging

1. Open A4.

2. Take out A3.

3. Remove the packaging and reinstall A3.

Facing as shown in image A

4. Close A4.

Do not place the product within 40 cm of the wall to ensure proper operation.

5. Plug A5 in a power outlet.

Use

Using the product

1. Press B15 to switch on the product.

2. Press B14 to increase / decrease the fan speed.

B2 indicates the selected fan speed.

3. Optionally, choose one of the following:

B13 to select ‘sleep’.
B12 to select ‘auto’.
B11 to select ‘anion’.
B10 to select ‘AQ’.

Keep the windows closed while the product is switched on.

Set auto mode

1. Press B14 to select auto mode.

B2 shows the selected mode.
The sensor indicates the air quality and adjust the speed of the fan if necessary.

2. Press B10 or B15 to exit this mode.

Set sleep mode

1. Press B13 to select sleep mode.

In sleep mode, the product operates as quiet as possible.

2. Press B13 or B15 to exit this mode.

Set timer

1. Press B12 to set the timer.

2. Press Be to increase / decrease the time.

B5 shows the selected time.
Time options: 2 hours, 4 hours, 8 hours.

3. To cancel the timer, restart the product.

Set anion mode

1. Press B11 to select anion mode.

The product releases millions of anions per second.

2. Press B11 or B15 to exit this mode.

Set Air Quality mode

1. Press B10 to select Air Quality mode.

A1 shows the air quality using colours.

Colour	Air quality
Red	Bad
Yellow	Fair
Blue	Good

Troubleshooting

Problem	Solution
The product does not switch on.	Connect to a power outlet. Check if the power cord is damaged. Make sure A4 is closed.
The product is making strange noises.	Make sure A3 is placed in the correct way. Press B14 to increase the speed Replace A3.
Poor purification quality.	Do not block ventilation openings and make sure that there is enough space around the product. Make sure A3 is placed in the right way. Make sure the room is smaller than 25 m². Replace A3.
The product spreads an unpleasant odour.	Make sure the room has a relative humidity below 85 %. Replace A3.
B8 illuminates after replacing A3.	Press and hold B9 for 3 seconds to reset.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

To clean the product:

Unplug the product before servicing.
Clean A3 at least once a month with a vacuum cleaner.
Do not clean with water or other liquids.

Check filter indicator

1. When B8 illuminates, check A3.

2. When dusty, clean as described in ‘To clean the product’.

Replace the filter

Replace the filter every 6 – 8 months.
See ‘Removing the packaging’ for information on how to remove and place A3.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.