Ansult 014834 Rgb Reflector Bulb Led Instruction Manual

Ansult 014834 Rgb Reflector Bulb Led Instruction Manual

ansult - logo014834 RGB Reflector Bulb LED
Instruction Manualansult 014834 RGB Reflector Bulb LEDImportant! Read the user instructions carefully before use. Save them for future reference.
(Translation of the original instructions),

Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

ansult 014834 RGB Reflector Bulb LED - figure

SAFETY INSTRUCTIONS

  • The product must not be connected to a dimmer circuit.
  • The product can only be dimmed with the remote control.
  • For indoor use only.
  • The product must only be used in a dry room.
  • The product must only be used with the supplied remote control.
  • The product is only intended for decorative lighting and is not suitable for room lighting.
  • For light sources that are a lot heavier than the light sources, they are replacing the greater weight can adversely affect the mechanical stability of some lights and fittings and can result in inferior contact and that the light source is less firmly attached.

SYMBOLS

Clarke IDH70L 70L Industrial Dehumidifier - icon 5Read the instructions.
ansult 014834 RGB Reflector Bulb LED - iconOnly dimmable with the remote control.
ansult 014834 RGB Reflector Bulb LED - icon 2Must only be used in a dry room.
MARMITEK Connect TS21 Toslink Digital Audio Switcher - ceApproved in accordance with the relevant directives.
Disposal ARecycle end-of-life products in accordance with local regulations.

TECHNICAL DATA

Rated voltage230 V50 Hz
Power consumption4.9W
SocketGU10
Luminous flux330 Im
Energy efficiency classG
Life span25000 h
Max number of cycles on/off12 500
Time for light source to reach 60% of brightness< 1 s
Start time< 0.5 s
Color temperature2700 K + RGB
Size53 mm x (50 mm
Ambient temperature-40 to 40°€
Range remote control3 m
Dimmer function, integrated5 stage

*Only with remote control

DESCRIPTION

  1. Off
  2. On
  3. Adjusting the brightness (5 stages)
  4. 42 colours that change in a repeated cycle (manually)
  5. White light
  6. 75 colors that change immediately or gradually in an automatically repeated cycle
  7. Colour display
    FIG. 1

HOW TO USE

NOTE:
When the light source has been switched off it always starts in automatic color-changing mode.

ansult 014834 RGB Reflector Bulb LED - icon 9Button off/on.
ansult 014834 RGB Reflector Bulb LED - icon 3Dimmer function. Press the left button to reduce the brightness.
Press the right button to increase the brightness.
ansult 014834 RGB Reflector Bulb LED - icon 4Manual control. Press the button to change the color manually.
15 colors that change gradually in a pre-programmed sequence.
ansult 014834 RGB Reflector Bulb LED - icon 5Button for cold white light.
ansult 014834 RGB Reflector Bulb LED - icon 6Automatic mode. Press the button to activate the automatic color changing with 15 colors that change immediately or gradually in an automatically repeated cycle.
ansult 014834 RGB Reflector Bulb LED - icon 7Press the button opposite the same column to gradually change color to the color of the button that is pressed.
ansult 014834 RGB Reflector Bulb LED - icon 8Press a button to show the color.

ETS-Lindgren 8000-040 RF Power Amplifier - icon 7JULA AB, BOX 363, SE-532 24 SKARA
2022-03-07
© Jula AB

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals