2696-115 Yorkville 6-Light Aged Darkwood with Silver Patina Geometric Pendant
Product Information
The product is Item#2696-115, a fixture that can hold up to 6
candelabra base bulbs of up to 60 watts each or CFL or LED
equivalent (not included). The fixture comes with a mounting plate,
ground screw, mounting screws, candle covers, and fixture wires for
black/smooth, white/ribbed, and bare copper (ground). The fixture
should be installed by shutting off power at the fuse box or
circuit breaker box. The installation should be completed by
connecting the electrical wires as shown in Fig. 2, placing the
canopy over the mounting plate, securing it with screws, placing
the candle covers over the sockets, and installing the bulbs
according to the fixture specifications.
Product Usage Instructions
- Shut off power at the fuse box or circuit breaker box before
installation. - Connect the fixture wires (black/smooth, white/ribbed, and bare
copper) to the house wires (black/hot, white/neutral, and
green/ground) as shown in Fig. 2. Ensure all wire connectors are
secured. - If your junction box has a ground wire (green or bare copper),
connect the fixture’s ground wire to it. Otherwise, connect the
fixture’s ground wire directly to the mounting plate using the
green screw provided. - Tuck wire connectors neatly into the junction box.
- Place the canopy over the mounting plate and secure it with
screws. - Place the candle covers over the sockets.
- Install up to six candelabra base bulbs of up to 60 watts each
or CFL or LED equivalent (not included) in accordance with the
fixture specification. Do not exceed the maximum wattage
rating. - Turn on power at the junction box and test the fixture.
INSTALLATION INSTRUCTIONS
Item#2696-115 (New. 2022/02/25) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S H U T P O W E R O F F AT F U S E O R CI RC U I T BR E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARATION (Fig.1) 1. Shut off power at the fuse box or circuit breaker box
and remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation. 3. Secure rod (E) onto all thread (G) on the fixture body. 4. Determine the desired hanging height and thread rods (F1, F2 and F3) to the all thread on rod (E). Attach canopy (C) by screwing onto rod (F1). Carefully pass the wires through each rod during assembly. Note: Remove the all thread, if installing with one 6″ rod only. 5. Attach the mounting plate (A) to the junction box (not included) with mounting screws (B) (Size: #8-32N*L0.5″). The side of the mounting plate (A) with “GND” marked on it and two convex points must face out.
CONNECTING THE WIRES (Fig. 2) 6. Connect the electrical wires as shown in fig 2, making
sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided. 7. Tuck wire connectors neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1) 8. Place canopy (C) over mounting plate (A) and secure
with screws (D). 9. Place candle covers (J) over sockets (H). 10. Install (6) six candelabra base bulbs (I) up to 60 watts
each or CFL or LED equivalent (not included) in accordance with the fixture specification. –DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Fig. 1 Set#A-021-118DH -Mounting plate -Ground screw -Mounting screw*2
A B C
D F1
F2 F3
Rod# W30-1-767*1(F1) W30-1-767 *2(F2) W30-H-767*1(F3) I E J G
H
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Candle cover#CCV24049P-767
Fig. 2 FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Page: 1/1
LA-3517E
