KLHB150WCD LED UFO High Bay Light
Product Information:
- Product Name: Hykolity LED UFO High Bay Light
- Power Input: AC100-277V
- Frequency: 50/60Hz
- Model and Power:
- Model: KLHB150WCD, Power: 150W, Input Current: 1.65A
- Model: KLHB200WCD, Power: 200W, Input Current: 2.2A
- Temperature Range: -30oC to 50oC
Product Usage Instructions:
- Thoroughly inspect the fixture for any freight damage. If any
damage is found, report it to the delivery carrier. - The installation of the product must be carried out by a
qualified electrician. - Installation Instruction:
- For Hook type installation:
- Lock the hook in place.
- Hang up the safety hook.
- Hang up the light.
- Lock the screw in place.
- The length of the plug wire is 5ft.
- The input voltage is 100V-277V.
- Connect the plug with the socket directly, as shown in Figure
A.
- If you do not need a socket, please use the electrician’s wire
pliers to cut off the plug, as shown in Figure B.
- After stripping, connect the wire according to the color of the
wire:
- Connect AC wire black wire to L
- Connect AC wire white wire to N
- Connect AC wire green wire to GND
Hykolity LED UFO High Bay Light
Thank you for purchasing our UFO Highbay. Please read the below articles carefully to see how to use this product safely. Warning contents and attention contents related to product safety use, please be sure to follow it.
AC100-277V , 50/60Hz.
22oF(-30oC)
122oF(50oC)
Model
Power Input Current Input Voltage Frequency
KLHB150WCD
150W 1.65A
AC100-277V 50/60Hz
KLHB200WCD
200W 2.2A
Thoroughly inspect the fixture for freight damage.Freight damage should be reported to the delivery carrier.
The Installation must be carried out by a qualified electrician.
Installation Instruction
1. Hook type:
1.Lock the hook
2. Hang up the safety hook.
Safety hook
2.Hang up the light.
3.Lock the screw.
screw hole screw
01
Hykolity LED UFO High Bay Light
Product Dimension
1.Hook type:
2. 7i n
11i n 150-200W
Wiring Diagram & Instruction:
1.The length of the plug wire is 5ft. 2.The input voltage is 100V-277V. 3.Connect the plug with the socket directly, as shown in Figure A. If you do not need a socket, please use the electrician’s wire pliers to cut off the plug, as shown in Figure B. After stripping, connect the wire according to the color of the wire,connect AC wireblack wire to L, white wire to N, and green wire to GND.
Fig.A
Fig.B
N White L Black
Green GND
02
