Sharpal 145h Diamond Lapping Plate Instructions

Product Information

Item No.: 145H

Product Name: Diamond Sharpening Stone

Product Usage: To sharpen and flatten the surface of knives,
scissors, and other cutting tools.

Product Usage Instructions

1. Flatness Measurement
   • Use a straight edge to measure the flatness of the stone.
   • Lay the straight edge down to the surface and try sliding a
     piece of paper between the straight edge and stone to check the
     possible gap to determine whether it needs flattening.
2. Soak and mark the stone
   • Soak the stone for around 10 minutes until bubbles
     disappear.
   • Then use a pencil to mark lines on your stone.
3. Flattening Stone
   • Rub the stone surface against the lapping plate and keep an eye
     on the pencil marks.
   • Once the marks have worn away, the flattening is finished.

   Method 1:

   • Hold the diamond sharpening stone onto the lapping plate with
     one hand.
   • Move the sharpening stone back and forth over the lapping plate
     with slight pressure.
   • Repeat this process until all pencil marks are removed from the
     sharpening stone surface.

   Method 2:

   • Place the sharpening stone on the lapping plate.
   • Move the lapping plate back and forth with slight
     pressure.
   • Repeat this process until all pencil marks are removed from the
     sharpening stone surface.
4. Maintenance
   • Rinse the lapping plate thoroughly and always keep it dry when
     storing the diamond stone.

*Watch its demo video on YouTube: bit.ly/145HVideo Or scan QR code

*Each SHARPAL product is warranted to be free from defects in
material and workmanship for 3 years from the date of purchase
under normal wear and tear, except for damage caused by misuse or
alteration. THIS WARRANTY APPLIES ONLY TO NON-INDUSTRIAL OR
NON-COMMERCIAL USE. If you want to make a warranty claim, please
contact us through SHARPAL website or send an email directly to
[email protected].