mikrozid Universal Wipes
Owner’s Manual=
mikrozid® universal wipes
Our Plus
- excellent materials compatibility
- broad spectrum antimicrobial activity including
SARS – CoV – 2 in 15 sec - effective according to EN16615 (4-field test) in 1 minute
- outstanding cleaning performance
- dermatologically tested
- perfume-free
Application areas
- Patient and resident nearby surfaces
- Patient and resident treatment areas
- High touch surfaces
- Examination tables and other nearby work surfaces
- Surfaces of medical equipment
- Keyboard or touch pads of sensitive communication equipment, such as smartphones or tablets

Microbiological efficacy
| Efficacy | Contacttime | Test |
| Bactericidal – S.aureus, P.aeruginosa | 15 sec | EN 13727 – dirty conditions |
| 60 sec | EN16615 – dirty conditions | |
| Bactericidal – E.hirae | 15 sec | EN 13727 – dirty conditions |
| 2 min | EN16615 – dirty conditions | |
| Yeasticidal – C.albicans | 60 sec | EN13624 – dirty conditions |
| 60 sec | EN16615 – clean conditions | |
| SARS – CoV – 2 | 2 min | EN16615 – dirty conditions |
| Rotavirus | 15 sec | EN14476 – clean conditions |
| Norovirus (MNV surrogate) | 15 sec | EN14476 – clean conditions |
| 30 sec | EN14476 – clean conditions | |
| Polyoma SV-40 | 60 sec | EN14476 – dirty conditions |
| 15 sec | in accordance with DVV1 and RKI Guideline2 12/20142 |
- DVV (German Registered Association for Combatting Viral Diseases).
- RKI Guideline (Robert Koch Institute – German Federal Government Agency and Research Institute for disease control and prevention.
Instructions for use
Perform hand hygiene before opening the softpack.
Thoroughly wipe the surface with the impregnated wipe.
Ensure the surface is wiped completely and remains wet for the recommended contact time. Make sure that all visible dirt is removed prior to disinfection.
Not for final disinfection of semicritical and critical medical devices.
If aligned with site policy, this product can be used without gloves.
Close the lid tightly after use.
Product data
Composition:
One softpack contains 120 ready-to-use pre-saturated wipes. 100 g solution contain the following active ingredients: 17.4 g Propan-2-ol, 12.6 g Ethanol (94 % w/w) Labelling according to Regulation (EC) No. 648/2004: < 5% anionic surfactants.
Chemical/physical data:
| Color | colourless |
| Density | ca. 0.95 g/cm3 |
| Flash point | 26 °C/Method : DIN 51755 Part 1 |
| Form | liquid |
| pH | 3 – 3.6 |
| Viscosity, dynamic | not determined |
Special advice
Use disinfectants safely.
Always read the label and product information before use.
The product is highly compatible with metals and synthetics. Please follow carefully any national fire and explosion protection guidelines when using alcohol-based disinfectants. Only treat small surfaces. The wiping range depends on the room temperature and on the structure of the surface to be disinfected. More information available on request.
Please dispose of used wipes in rubbish bin.
Do not flush down toilet.
Information for ordering
| Item | Delivery form | Item no. |
| mikrozid® universal wipes (120 wipes, each wipe 20cm x 20cm) mikrozid® wipes holder | 6/Carton each | 70003234 60000484 |
Schulke Australia Pty Ltd | Macquarie Park NSW 2113 | Tel: 1800 724 855 | www.schuelke.com.au
Schulke New Zealand Ltd | Auckland 1010 | Tel: 0800 724 855 | www.schuelke.co.nz


















