CA2299-4L Low Voltage Matte Black Hardwired Weather Resistant Integrated LED
Product Information
The product is a CA2299-L fixture that requires assembly and
installation. Before installation, it is important to consult local
electrical codes for wiring and grounding requirements. The fixture
should not be installed in areas with strong airflow or air
conditioning jets to ensure proper functionality. The product comes
with assembly and installation instructions that should be read and
saved for future reference.
Product Usage Instructions
- Fix the joint tube in the corresponding connecting tube and
ground through the inner tooth segment, and tighten it. - Unplug the wire from the socket box.
- Connect the wire (usually black insulated) from the fixture to
the black wire of the power supply using a wire nut. - Connect the neutral wire (usually white-insulated) from the
fixture to a power supply using a wire nut. - Turn on the power at the fuse or circuit box.
Note: To avoid the risk of electrical shock, ensure that power
is shut off while installing or servicing this fixture. It is
important to follow all assembly and installation instructions
provided with the product.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
CA2299-L
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
To work properly.you should install this fixture NOT confront any jets of air conditions or strong airflow
Dental segment Take over
1. Fix the joint tube in the corresponding connecting tube and ground through the inner tooth segment, and tighten it.
2. Unplug the wire from the socket box. Wire connections are made using wire nuts as follows:-connect the wire (usually black insulated) from the fixture to the black wire of the power supply. A white wire that connects a neutral (usually white-insulated) wire from a fixture to a power supply.
Turn on the power at fuse or circuit box.
24″
Ground Penetration Power input wire
