HLA2315-W 1-Light Black Hardwired Outdoor Wall Sconce
Product Information
The product is called “La Plus Belle” and it is a light fixture.
The user manual provides instructions for assembling and installing
the fixture. The manual includes a warning to shut off power at the
fuse or circuit breaker before installation. The fixture comes with
a mounting plate, a glass cover, and all necessary screws and
wires. The user manual also includes information on how to prevent
moisture from entering the outlet box and causing a short
circuit.
Product Usage Instructions
- Shut off the power at the circuit breaker box before beginning
installation. - Remove the old fixture and all hardware from the junction
box. - Unpack the new fixture and lay out all parts on a clear area,
taking care not to lose any small parts necessary for
installation. - Fix the mounting plate on the junction box with the box
screw. - Connect the electrical wires as follows:
- Connect the black wire from the fixture to the black house
(hot) wire. - Connect the white wire from the fixture to the white (neutral)
house wire. - If your outlet box has a ground wire, connect the fixture’s
ground wire to it. Otherwise, attach the bare copper fixture wire
to the green ground screw on the mounting plate. - Make sure all wire nuts are secured and you may wrap the
connections with electrical tape.
- Connect the black wire from the fixture to the black house
- Tuck the wire connections neatly into the wall junction
box. - Prevent moisture from entering the outlet box and causing a
short circuit by using clear caulking (i.e. Indoor/Outdoor Silicone
Sealant) to outline the outside of the fixture back plate where it
meets the wall, leaving a space at the bottom to allow moisture a
means to escape. - Turn on the power to the junction box and test the
fixture.
La Plus Belle
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.
***WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. ***ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
FIG.1
To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. Indoor/Outdoor Silicone Sealant) to outline the outside of fixture back plate where it meets the wall leaving a space at bottom to allow moisture a means to escape.
ASSEMBLING THE FIXTURE (Fig.1) 1.Shut off the power at the circuit breaker box. Remove old fixture
and all hardware from Junction Box. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation. 2.Fix mounting plate D on junction box with Box Screw . The side of
the mounting plate marked “GND” must face out. The junction box is not included. 3. Attach the back plate(D) of the lamp body (B) onto the junction box, and lock it securely with the Mounting Screw. 4.Follow wiring instructions carefully.(see fig.2) 5.Attach the back plate of the lamp body (B) onto the junction box, and lock it securely with the Mounting Screw. 6.Install the light bulbs(not included) in accordance with the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUN WATTAGE RATING!
Mounting Screw Supply Wire Supply Ground Wire
Junction Box (Not included)
Supply Wire Mounting Plate
D Box Screw Fixture Wire
Caulking Screw Glass
Bulb(Not included) B
CONNECTING THE WIRES (Fig.2)
FIG.2
1. Connect the electrical wires as follows. Connect the Black wire
FIXTURE
from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with
WIRES Black or
electrical tape. If your outlet box has a ground wires (green or bare Smooth
FIXTURE WIRES White or Ribbed
copper) connect fixture’s ground wire to it. Otherwise attach the
bare copper fixture wire to the green ground screw on the mounting plate. 2. Tuck the wire connections neatly into the wall junction box.
HOUSE WIRES
HOUSE WIRES
Black(Hot)
White
Your installation is now complete. Return power to the junction box and test the fixture.
(Neutral)
MADE IN CHINA
FIXTURE WIRES Bare Copper (Ground)
HOUSE WIRES Green or Bare Copper(Ground)
LA2315-W
